Cad files about galileo2 HOT 6 CLOSED

As soon as I can get them out, they will be out. I've been short on time for the past few months, but I am still actively working on this. I've had a bit more time in the last week or so, and so long as I'm able to keep pace, they should be out in the next couple of weeks.

from galileo2.

Hello !

Great news since i was waiting for it to buy a kit since i want to use the Stealthburner POGO Toolhead mod

Best regards.

from galileo2.

@grimlokason I know this is off topic but those POGO pins are only rated for 2A which at 24v is only 48 watts. So you are going to be stuck at 40w heater which isn't enough anymore unless you want to print at original Ender 3 speeds. Also they add "Contact resistance: 20mW max" which I think might throw off thermistor readings. For the front cover of the Stealthburner will be fine but the hotend, no way.

Current rating: 2A (continous), 3A (peak) per contact

https://www.mill-max.com/catalog/download/2019-08%3A014.pdf

from galileo2.

Hello @ChaosBlades

for the power concern : it's in the Mounting options we can use 2 pogo for the hotend. but I'll try to do a PR to the doc with your feedback to give more information.

About your concern for the thermistor, i'll check with the one who have done the mod.

Thank you !

( and sorry izanamisu, JaredC01 for the Hijack >.< )

from galileo2.

@grimlokason I know this is off topic but those POGO pins are only rated for 2A which at 24v is only 48 watts. So you are going to be stuck at 40w heater which isn't enough anymore unless you want to print at original Ender 3 speeds. Also they add "Contact resistance: 20mW max" which I think might throw off thermistor readings. For the front cover of the Stealthburner will be fine but the hotend, no way.

Current rating: 2A (continous), 3A (peak) per contact

https://www.mill-max.com/catalog/download/2019-08%3A014.pdf

Current rating is indeed a real concern..
As stated by grim lokason the pogo mod was designed with an option to double the pins used for extruder power... providing a 80w option with 100%pwm (120w peek power).
Return of experience is very positive, if using the millmax pogos.... Hartk tried some cheap ali pogos which didn't last very long.
My setup has been woking since the release date. Do the pogos induce a drift to the temp reading? This is indeed a nice question, I haven't check or measured, but if been printing my ASA with a 250° setting and have great quality. Anyway... filament settings always need to be tuned ....

from galileo2.

CAD released, and ERCF team already released updated STLs. Closing.

from galileo2.