ARM7 Docker Support about auto-southwest-check-in HOT 11 CLOSED

Yes, I should just need to include the architecture in the Docker workflow.

from auto-southwest-check-in.

Unfortunately, the brotli wheel fails to install while building this image, so this might take a little bit of time to support as I don't have access to an ARM v7. If you are familiar with Docker, it would be great if you could try building it and potentially fixing any issues that appear.

Edit: I was actually able to test a build locally using Docker Buildx. I was able to fix the brotli installation by installing g++. However, cryptography also fails to build due to Rust not being installed. Unless these wheels are available to download, I don't see it being possible to add ARM v7 support yet.

from auto-southwest-check-in.

This should not have been automatically closed because I reverted that commit.

from auto-southwest-check-in.

Unfortunately, I don't see it being possible to support this anytime soon. If anyone else wants to try to add support for this, that would be appreciated. I'll brief what I tried already.

In addition to what I said above, I tried to use piwheels as an --extra-index-url for pip, but that only downloaded to packages that were not custom-built for ARMv7. For example, it would still try to build PyYAML from source (and a few others like cryptography, cffi, and brotli). I tried on both the python:3.11-alpine image and the python:3.11 image, but had the same result on both.

If you still want to use this script on ARMv7, it appears that the only option currently is to run it locally for now. Unless the Python packages mentioned above release support for ARMv7 musllinux, I don't see supporting this being possible.

from auto-southwest-check-in.

Has there been any more traction on this at all? I'm running into the same problem right now.

from auto-southwest-check-in.

Has there been any more traction on this at all? I'm running into the same problem right now.

Thanks for reminding me about this. I just tried building it with ARMv7 and it did successfully work (using emulation). I don't have an ARMv7 device to test it on, so could you do docker build . after cloning the repository and then run it to see if that works for you?

from auto-southwest-check-in.

It seems like it is running, but I'm not sure I am able to give it any commands or anything. As soon as I run the docker, it exits but returns no errors.

docker inspect auto-southwest-container-temp [ { "Id": "8b024475c404279e5d47ad8d4a8e5206b416f789aae6642717c57b0eb1731019", "Created": "2024-01-26T23:46:30.105680712Z", "Path": "python3", "Args": [ "-u", "southwest.py" ], "State": { "Status": "exited", "Running": false, "Paused": false, "Restarting": false, "OOMKilled": false, "Dead": false, "Pid": 0, "ExitCode": 0, "Error": "", "StartedAt": "2024-01-27T00:09:07.893739719Z", "FinishedAt": "2024-01-27T00:09:11.810202773Z" }, "Image": "sha256:6331c58469c854c4687e529b8bbda525e88518a7186e5250028ead65198bad41", "ResolvConfPath": "/var/lib/docker/containers/8b024475c404279e5d47ad8d4a8e5206b416f789aae6642717c57b0eb1731019/resolv.conf", "HostnamePath": "/var/lib/docker/containers/8b024475c404279e5d47ad8d4a8e5206b416f789aae6642717c57b0eb1731019/hostname", "HostsPath": "/var/lib/docker/containers/8b024475c404279e5d47ad8d4a8e5206b416f789aae6642717c57b0eb1731019/hosts", "LogPath": "/var/lib/docker/containers/8b024475c404279e5d47ad8d4a8e5206b416f789aae6642717c57b0eb1731019/8b024475c404279e5d47ad8d4a8e5206b416f789aae6642717c57b0eb1731019-json.log", "Name": "/auto-southwest-container-temp", "RestartCount": 0, "Driver": "overlay2", "Platform": "linux", "MountLabel": "", "ProcessLabel": "", "AppArmorProfile": "", "ExecIDs": null, "HostConfig": { "Binds": [ "/data/ddns/data/config.json:/app/config.json" ], "ContainerIDFile": "", "LogConfig": { "Type": "json-file", "Config": {} }, "NetworkMode": "default", "PortBindings": {}, "RestartPolicy": { "Name": "no", "MaximumRetryCount": 0 }, "AutoRemove": false, "VolumeDriver": "", "VolumesFrom": null, "CapAdd": null, "CapDrop": null, "CgroupnsMode": "private", "Dns": [], "DnsOptions": [], "DnsSearch": [], "ExtraHosts": null, "GroupAdd": null, "IpcMode": "private", "Cgroup": "", "Links": null, "OomScoreAdj": 0, "PidMode": "", "Privileged": false, "PublishAllPorts": false, "ReadonlyRootfs": false, "SecurityOpt": null, "UTSMode": "", "UsernsMode": "", "ShmSize": 67108864, "Runtime": "runc", "ConsoleSize": [ 0, 0 ], "Isolation": "", "CpuShares": 0, "Memory": 0, "NanoCpus": 0, "CgroupParent": "", "BlkioWeight": 0, "BlkioWeightDevice": [], "BlkioDeviceReadBps": null, "BlkioDeviceWriteBps": null, "BlkioDeviceReadIOps": null, "BlkioDeviceWriteIOps": null, "CpuPeriod": 0, "CpuQuota": 0, "CpuRealtimePeriod": 0, "CpuRealtimeRuntime": 0, "CpusetCpus": "", "CpusetMems": "", "Devices": [], "DeviceCgroupRules": null, "DeviceRequests": null, "KernelMemory": 0, "KernelMemoryTCP": 0, "MemoryReservation": 0, "MemorySwap": 0, "MemorySwappiness": null, "OomKillDisable": null, "PidsLimit": null, "Ulimits": null, "CpuCount": 0, "CpuPercent": 0, "IOMaximumIOps": 0, "IOMaximumBandwidth": 0, "MaskedPaths": [ "/proc/asound", "/proc/acpi", "/proc/kcore", "/proc/keys", "/proc/latency_stats", "/proc/timer_list", "/proc/timer_stats", "/proc/sched_debug", "/proc/scsi", "/sys/firmware" ], "ReadonlyPaths": [ "/proc/bus", "/proc/fs", "/proc/irq", "/proc/sys", "/proc/sysrq-trigger" ] }, "GraphDriver": { "Data": { "LowerDir": "/var/lib/docker/overlay2/762ae2aa253d020464beeb37f26174a0ae123d6fc8ebeac4f545cac97ff59658-init/diff:/var/lib/docker/overlay2/7cc68d388bdfb0f9461d4cd399db93bc44a7a97644662004116acacb61a8e3b3/diff:/var/lib/docker/overlay2/10e1bd0082233e42c2891d6b6f59e0a27e4b2ffcd41c5a14c87988a64c00bec7/diff:/var/lib/docker/overlay2/cdf98fb9b9b90be8558ee2afb934b9432fe3f5e2254f3dff4c82a5a8cae3ae41/diff:/var/lib/docker/overlay2/f35898128e1e69ab9dfe3ed0ebdb8ade9a336e93f08b88d66954fc2d25aa41c0/diff:/var/lib/docker/overlay2/29b30567fc8ea34fa4e01d05943b9e003ea9019812bb7d1da6c660fc60fd71f1/diff:/var/lib/docker/overlay2/265758db1b21fa9bcf016fe72e1296c7e5d4109cedec1a4eb4547512bf825297/diff:/var/lib/docker/overlay2/2b5d62d4e38f48cd6b05c34207b1fc4172ba6c1736f1835745fedf596542946e/diff:/var/lib/docker/overlay2/640ed04f17d013b4d131b28cd42227ef08ee81c7fd9ee7731a9a9e3b519b724f/diff:/var/lib/docker/overlay2/30188b77f4ae14ba11903841318dbfb2d7f3a8e763465e412681c742927fe1d9/diff:/var/lib/docker/overlay2/81525bd6095e916bac73c987ad8b9280cfe221c0f9f06ed835e6c214ecd88489/diff:/var/lib/docker/overlay2/aea39dae813edab710ced12088a3d26dd2d396ec0a7937b7c61b3d5324187ba7/diff:/var/lib/docker/overlay2/a6bd890aae0c1e5c42e6b49662d285996d4cf503385902e12af48388dc4fe7fd/diff", "MergedDir": "/var/lib/docker/overlay2/762ae2aa253d020464beeb37f26174a0ae123d6fc8ebeac4f545cac97ff59658/merged", "UpperDir": "/var/lib/docker/overlay2/762ae2aa253d020464beeb37f26174a0ae123d6fc8ebeac4f545cac97ff59658/diff", "WorkDir": "/var/lib/docker/overlay2/762ae2aa253d020464beeb37f26174a0ae123d6fc8ebeac4f545cac97ff59658/work" }, "Name": "overlay2" }, "Mounts": [ { "Type": "bind", "Source": "/data/ddns/data/config.json", "Destination": "/app/config.json", "Mode": "", "RW": true, "Propagation": "rprivate" } ], "Config": { "Hostname": "8b024475c404", "Domainname": "", "User": "", "AttachStdin": true, "AttachStdout": true, "AttachStderr": true, "Tty": true, "OpenStdin": true, "StdinOnce": true, "Env": [ "PATH=/usr/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin", "LANG=C.UTF-8", "GPG_KEY=7169605F62C751356D054A26A821E680E5FA6305", "PYTHON_VERSION=3.12.1", "PYTHON_PIP_VERSION=23.2.1", "PYTHON_GET_PIP_URL=https://github.com/pypa/get-pip/raw/049c52c665e8c5fd1751f942316e0a5c777d304f/public/get-pip.py", "PYTHON_GET_PIP_SHA256=7cfd4bdc4d475ea971f1c0710a5953bcc704d171f83c797b9529d9974502fcc6", "AUTO_SOUTHWEST_CHECK_IN_DOCKER=1" ], "Cmd": null, "Image": "auto-southwest-check-in", "Volumes": null, "WorkingDir": "/app", "Entrypoint": [ "python3", "-u", "southwest.py" ], "OnBuild": null, "Labels": {} }, "NetworkSettings": { "Bridge": "", "SandboxID": "afe81504113777fa38d62306dcc64b5b5685cc57d1eb4b2e44788afe119d5787", "HairpinMode": false, "LinkLocalIPv6Address": "", "LinkLocalIPv6PrefixLen": 0, "Ports": {}, "SandboxKey": "/var/run/docker/netns/afe815041137", "SecondaryIPAddresses": null, "SecondaryIPv6Addresses": null, "EndpointID": "", "Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "IPAddress": "", "IPPrefixLen": 0, "IPv6Gateway": "", "MacAddress": "", "Networks": { "bridge": { "IPAMConfig": null, "Links": null, "Aliases": null, "NetworkID": "ab1bda4ba2c689d49557b0d8c41ac7ea17e84fe990ce0506a0e874c5e57e343f", "EndpointID": "", "Gateway": "", "IPAddress": "", "IPPrefixLen": 0, "IPv6Gateway": "", "GlobalIPv6Address": "", "GlobalIPv6PrefixLen": 0, "MacAddress": "", "DriverOpts": null } } } } ]

from auto-southwest-check-in.

Could we chat on Discord or some other method to walk through and make sure I'm doing it right? I guess the big thing is that I'm not getting any errors when I built it, but right now I'm having trouble having it do anything other than build and then exit right away.

from auto-southwest-check-in.

Could we chat on Discord or some other method to walk through and make sure I'm doing it right?

Sure. Just email me your username (or put it here if you want) and we can continue the conversation on there.

from auto-southwest-check-in.

discord - guitarwonderboy

from auto-southwest-check-in.

Will be resolved in v7.3 (currently, the develop image supports ARMv7). Thanks to @matchmee for helping test.

from auto-southwest-check-in.