set-time command sets wrong register values about inverter-connect HOT 2 CLOSED

Yes, the time set does not work properly.
In the forum also often people write that the registers are not updated.

But it looks like the day counter is reset anyway. That is actually the point.

I will build an automatism for this. That early in the morning always the time is set to reset the day counter.

But at the moment I try it via NTP.

It seems that you can specify an NTP server and that the time is really set correctly.

I added a example in the print-at-commands help:

    e.g.: Set NTP server, enable NTP and check the values:

    .../inverter-connect$ ./cli.py print-at-commands 192.168.123.456 NTPSER=192.168.1.1 NTPEN=on NTPSER NTPEN

in e64477b

from inverter-connect.

Today i check the behavior:

A working NTP does not lead to a reset.
The ./cli.py set-time works for me: The daily counter is set to 0.

from inverter-connect.