Atmega328 8mhz PB3 and PB4 for VID and SYNC, Atmega 168 16 mhz not working. about arduino-tvout HOT 6 OPEN

As I read the current version does not work with 8mhz. I guess that could be 
the problem.Could you please tell me how to get the current version of the lib 
running at 8Mhz.

I tried the 5.9 ver of the lib on Atmega328 at 8Mhz and I get the output at PB0 
and PB1. But when I changed the pins to PB3 and PB4 in hardware_setup.h I get 
no output. Could you please tell me why the library (Beta1.0 or ver 5.9) works 
only on the pins mentioned in the lib and not working if we redefine the output 
on different pins.

And TVout ver5.9 is not working with Atmega168 at 16 mhz.

I think it cannot be used on PB3 as it just an 8 bit timer output. So I guess 
only 16 bit timer will do. However I tried to get the new and old libs to work 
on 168 at PB1 and PB0 default but no luck.

Now I loaded the TVout5.9 onto the Atmega328 at 8Mhz but I do not get any free 
flowing video on it.Just when I touch the sync and vid pin I get a frozen and 
misaligned frame. I do not know what could be causing the problem? (I am using 
450-900 ohm split without the diodes).Please advice.Thanks in advance.

solved..

How was it solved? I am having a similar problem, but with beta1.