Comments (5)
Scratch this report. I'm clearly having a problem with the cygwin install scrips
instead of puttycyg.
2010/05/11 10:18:25 running: C:\cygwin\bin\bash.exe --norc --noprofile
/etc/postinstall/000-cygwin-post-install.sh
9 [main] bash 3744 C:\cygwin\bin\bash.exe: *** fatal error - couldn't allocate
heap, Win32 error 487, base 0x6D0000, top 0x730000, reserve_size 389120,
allocsize
393216, page_const 4096
8 [main] bash 2840 fork: child -1 - died waiting for longjmp before
initialization, retry 0, exit code 0x100, errno 11
9 [main] bash 3936 C:\cygwin\bin\bash.exe: *** fatal error - couldn't allocate
heap, Win32 error 487, base 0x6D0000, top 0x730000, reserve_size 389120,
allocsize
393216, page_const 4096
4142302 [main] bash 2840 fork: child -1 - died waiting for longjmp before
initialization, retry 0, exit code 0x100, errno 11
9 [main] bash 2100 C:\cygwin\bin\bash.exe: *** fatal error - couldn't allocate
heap, Win32 error 487, base 0x6D0000, top 0x730000, reserve_size 389120,
allocsize
393216, page_const 4096
9140588 [main] bash 2840 fork: child -1 - died waiting for longjmp before
initialization, retry 0, exit code 0x100, errno 11
9 [main] bash 3940 C:\cygwin\bin\bash.exe: *** fatal error - couldn't allocate
heap, Win32 error 487, base 0x6D0000, top 0x730000, reserve_size 389120,
allocsize
393216, page_const 4096
16307872 [main] bash 2840 fork: child -1 - died waiting for longjmp before
initialization, retry 0, exit code 0x100, errno 11
9 [main] bash 3588 C:\cygwin\bin\bash.exe: *** fatal error - couldn't allocate
heap, Win32 error 487, base 0x6D0000, top 0x730000, reserve_size 389120,
allocsize
393216, page_const 4096
27325926 [main] bash 2840 fork: child -1 - died waiting for longjmp before
initialization, retry 0, exit code 0x100, errno 11
/etc/postinstall/000-cygwin-post-install.sh: fork: Resource temporarily
unavailable
2010/05/11 10:18:57 abnormal exit: exit code=128
Original comment by [email protected]
on 11 May 2010 at 2:44
from puttycyg.
I'm receiving the same error message as above "Failed to allocate
pseudoterminal".
Under medgar123's comment he posted some information which nulls the request,
unfortunately I don't know what he ran to get that data so I can determine
whether is
issue with my install or the puttycyg.
Cheers
Original comment by [email protected]
on 21 May 2010 at 3:22
from puttycyg.
I was pulling my hair out for a while trying to figure it what my problem was,
and
eventually stumbled upon the solution that fixed my Ills. I don't know if this
will
help you, but I found that our Dell boxes come preinstalled with some Wave
Systems
Corp TPM garbage, which was interfering with my installation of Cygwin 1.7.5. I
don't
even know who finds that trash useful, much less anything than utterly annoying
and
interfering with the operation of a clean system...
Check item 44. http://www.cygwin.com/faq/faq.using.html
After removing it, I cleaned out my borked install directory and tried again
and it
worked.
What happens right after the cygwin install? When I was doing it while this TPM
was
active, I could run the batch file and launch cygwin, but I wouldn't have a home
directory, /bin wouldn't be on the path, etc. I was able originally to create a
.bashrc and I created my home directory manually, so I didn't think anything was
really wrong at first. I thought it was due to coming from 1.5 or something and
I
just had to tweak it manually as a result. But then puttycyg would never
connect.
After finally discovering that I might be prevented from install by some TPM, I
removed it, reinstalled, and ran the batch file. Everything was working, I had a
$HOME, commands were on the path, etc. I didn't have to do any of this manual
configuring. Then I launched puttycyg and it worked immediately, no hassle.
Be sure to check your /var/log directory and check the setup log after setup
completes. I would have saved a lot of time if I had immediately been searching
on
the error: "couldn't allocate
heap, Win32 error 487, base 0x6D0000, top 0x730000, reserve_size 389120,
allocsize"
Hope this can help
Original comment by [email protected]
on 21 May 2010 at 3:42
from puttycyg.
Wow, thanks for the tips, JCerwinske!
Original comment by medgar123
on 21 May 2010 at 7:42
from puttycyg.
Original comment by medgar123
on 30 Jun 2010 at 9:18
- Changed state: WontFix
from puttycyg.
Related Issues (20)
- add utmp support HOT 1
- After CTRL-C to terminate executing process command text is no longer visible on input HOT 1
- Can't run a command from the commandline HOT 3
- Overflow error still not resolved
- Word-wrap at bash prompt doesn't work properly HOT 6
- Flow control HOT 3
- Incomplete output from cygcheck in PuTTYcyg session
- PuTTY 0.61 Released HOT 8
- PuTTY 0.61 released, will a new PuTTYCyg be coming? HOT 3
- Instead of opening ssh, config window is opened. HOT 1
- Can't open terminal, getting 'permission denied' error HOT 2
- Failed to checkout source code from svn HOT 1
- keyboard problem - Home and End keys dont work HOT 1
- Status of project HOT 9
- Cygwin filesystem root gets wrong
- Serial option not supported on command line - reports unknown option "-serial" HOT 1
- Suggestion: Automatic hyperlinking
- Would be nice if the puttycyg application could be signed, would save user the work of needing to Unblock it
- Please make a PuttyCyg based on latest Putty, current PuttyCyg propagates a serious remote port forwarding bug as manifested with a latest OpenSSH_6.1 OpenSSL 1.0.1c 10 May 2012 OpenBSD remote host. HOT 1
- puttycyg with 64bit cygwin? HOT 5
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from puttycyg.