import error on module request - streaming session 4 by the py script about goprostream HOT 6 CLOSED

you're using 2.7, use Python 3.5 and make sure urrlib is installed.

from goprostream.

It works-
After script run launching the command:
ffplay -fflags nobuffer -f:v mpegts -probesize 8192 rtp://10.5.5.9:8554
or
ffplay udp://10.5.5.9:8554
it streams properly.
But it doesn't start if a moment before run the script i don't press the button on the back... i've to awake manually the cam!! . I think there's something wrong according the instruction... i thin also it sholuld be possible to awake the camera like the app does... correct?

from goprostream.

from goprostream.

You need a wakeonlan command to turn it on

from goprostream.

uhm the "magic packet"i'm reading in your posts.. ..? ok i'll study on the net how get it...
one question on feasibility of a project that get me here?
All this is catching me sleepy hours for one hobby project I've in mind... I would command the gopro underwater.
The idea is to get closer the camera an access point (encloused ip68 of course) in order to get signal wired within a cat6 cable... is it possible? should I change the script in order to take in account the access point, the port etc or it's straightforward? I'm thinking to this device:
TP-Link TL-WR802N Nano Router Wi-Fi, 300 Mbps, Router, Repeater, Client, AP e WISP .

if this is OT for GitHub I'd appreciate a PM on [email protected].
As you said on a post all this it's not only an informatic excercise but has pratical application and action cam are not only for sport!

thanks in advance...

from goprostream.

from goprostream.