Name: Pete Lewis
Type: User
Company: Sparkfun Electronics
Bio: After getting a degree in music at CU Boulder, I took a job at Sparkfun as an assembly tech, then Test Developer, QC manager, and eventually, Engineer!
Location: Boulder CO
Pete Lewis's Projects
Testing out how to do a 360 spin image on github pages
AmebaD Arduino third-party package SDK
Surround sound audio mixing controlled by serial commands. Making mixes that fly!
Like the classic "Simon Says" 4-button memory game, but on trampolines. Wahoo!!
Using python and Tkinter, this little GUI makes interacting with excel spreadsheets (checklists) so much fun!
A python tool for organizing recipes and creating grocery lists
Create a CRC function using an Arduino and lots of serial terminal debug. Start simple and slow. Gain understanding.
While flying my RC airplane line-of-sight, I want to know some data from the plane (battery voltage, airspeed, turn coordination, G-forces). Maybe I can display this data in real time with some LEDs located in my peripheral vision. I'm gonna clip some electronics to my sunglasses and see how this goes :)
light patterns on some leds jammed into hot glue sticks
Software, firmware and hardware of the IOIO - I/O for Android
Laser cut files to do a two-piece wing setup on a LeFish RC Glider
Arduino Library Manager list
A alarm clock for my toddler that turns on a light and let's him know it's okay to wake up.
An open source approach to parenting. Share knowledge, avoid the crying, have fun.
A shield for Raspberry Pi 2, used for programming AVR ICs. Includes capsense pad to engage, 3x2 ISP header for connectivity and status LEDs.
Get info from feature or measure two features.
Qwiic Breakout board for the BNO080 IMU
A DIY Jukebox using SparkFun qwiic boards. It uses RFID cards to "select" an MP3 and arcade buttons to play/pause/stop.
Universal wireless communication library for Arduino
This repo will house testbeds for the new Serial LCDs (both versions: 16x2, 20x4)
A small PCB with a hall effect sensor that can sense very slight movement of a magnet on a servo horn.
Watch Kit
Launching the ol' snake-in-a-can gag into a new dimension!
The Eagle settings SparkFun uses for board designs
An art installation highlighting 150+ retired test-beds from SparkFun Electronics Quality Control Department
Pick and place machine using a robotic arm and suction nozzle. It is intended to be used to pick up assembled circuit boards from a cartridge and place them onto a test jig (bed of nails style). Then after successful testing, place them back into another "good" cartridge. If boards to not pass testing, then they will be placed aside for rework.
A beacon/target positioning system using a rotating receiver and/or transmitter.