How can I have the power_off all on about flipper-irdb HOT 7 OPEN

It's very possible the universal remote has been updated since this file was made and is looking for something else. But it's also possible the file you downloaded did not download correctly. Try saving the file from this link and see if it works better.

from flipper-irdb.

It has the same issue.

Is there any way I could get a debug log for this so I can help with investigation? I do have debug enabled on the device but I don't see anything relevant to running of the script

64430261 [RPC] (7) Storage List @/ext/infrared START 64430354 [RPC] (7) Storage List @/ext/infrared SUCCESS 64451431 [RPC] (8) Storage Remove @/ext/infrared/Power_off_ALL.ir START 64451495 [RPC] (8) Storage Remove @/ext/infrared/Power_off_ALL.ir SUCCESS 64451495 [RPC] (9) Storage List @/ext/infrared START 64451583 [RPC] (9) Storage List @/ext/infrared SUCCESS 64467289 [UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json 64467635 [UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json 64488636 [RPC] (10) Gui Start ScreenStream START 64488689 [RPC] (10) Gui Start ScreenStream SUCCESS 64496918 [RPC] (11) Gui Send Input START 64496975 [RPC] (11) Gui Send Input SUCCESS 64496976 [RPC] (12) Gui Send Input START 64497034 [RPC] (12) Gui Send Input SUCCESS 64497034 [RPC] (13) Gui Send Input START 64497091 [RPC] (13) Gui Send Input SUCCESS 64497091 [RPC] (14) Gui Send Input START 64497151 [RPC] (14) Gui Send Input SUCCESS 64497151 [RPC] (15) Gui Send Input START 64497211 [RPC] (15) Gui Send Input SUCCESS 64497212 [RPC] (16) Gui Send Input START 64497270 [RPC] (16) Gui Send Input SUCCESS 64509328 [RPC] (17) Gui Send Input START 64509381 [RPC] (17) Gui Send Input SUCCESS 64509422 [RPC] (18) Gui Send Input START 64509477 [RPC] (18) Gui Send Input SUCCESS 64509478 [RPC] (19) Gui Send Input START 64509534 [RPC] (19) Gui Send Input SUCCESS 64534464 [qt.qpa.mime] Retrying to obtain clipboard.

from flipper-irdb.

@UberGuidoZ do you have any idea on this please? :)

from flipper-irdb.

When you save the file I linked, you need to follow the same directions about renaming it and replacing the projectors IR file. From your screenshot, it appears that was not done this time.

from flipper-irdb.

It's very possible the universal remote has been updated since this file was made and is looking for something else. But it's also possible the file you downloaded did not download correctly. Try saving the file from this link and see if it works better.

There is 1 strange signal:

name: POWER
type: parsed
protocol: NECext
address: 04 01 00 00
command: 344 00 00 00

command: 344 00 00 00

from flipper-irdb.

@kdpdev Where are you seeing the incorrect signal?

from flipper-irdb.

@UberGuidoZ , go to the link that had provided by you: https://raw.githubusercontent.com/Lucaslhm/Flipper-IRDB/main/Converted/Power_off.ir
Try to find there the string: command: 344 00 00 00
344 is not wellformed byte of hex format. There are should be exactly 2 symbols in ranges [0-9], [a-f], [A-F]

from flipper-irdb.