Request: pass original DMR IDs to XLX interlink about xlxd HOT 6 OPEN

For example they have several radios of different vendor and so on. This is existing situation that cannot be ignored.

from xlxd.

I mean users may have more that single ID in general. In this case a xlxd gets the QSO with one source ID but after this call will be transferred to the second xlxd, the last one can set second (or third) ID to the outbound DMR transmission.
In general it could be OK but... Since xlxd passes embedded signalling AS-IS the call receiver may be in trouble due to values of source ID of voice header and embedded signalling may differ.
So it would be good if xlxd will enrich DSVT voice header packet with Full LC on the same way as it does with DV Frame packets.

from xlxd.

Ok, we are going to see what we can do.
73, Luc

from xlxd.

I know that there are users who have several ID, but can you explain why?

from xlxd.

So you mean that those people are talking at the same time with two different radios and different ID's but the same callsinge ??? Ok, let's make it complicated ??

from xlxd.

Just for more clarity on the having multiple ID's. It is a requirement to have multiple ID's if you own different vendors of radio. I own Motorola and Chinese radios and use full APRS/GPS and TMS messaging on both. To set them up properly in Brandmeister for routing it requires separate DMR ID's in the Brandmeister system as one is for the Motorola Mototrbo version of TMS and the other is for the non-standard Chineese version of TMS.

from xlxd.