Exception in function `get_max_connection_speed` about sysmon HOT 6 CLOSED

Exactly, that is the problem! Just ran into the same issue! Give me a few moments!

from sysmon.

Can confirm it fixes the crash for me

from sysmon.

Alright, on my Laptop it seems to work now and the GUI is not crashing. However, the GUI is not showing "disconnected" yet, still needs to be done.

Please try again! Sorry for the inconvenience!

from sysmon.

Hi :)

So what fails is the part of getting the wifi bandwidth. M̶a̶y̶b̶e̶ ̶i̶w̶c̶o̶n̶f̶i̶g̶ ̶i̶s̶ ̶n̶o̶t̶ ̶i̶n̶s̶t̶a̶l̶l̶e̶d̶ ̶o̶n̶ ̶y̶o̶u̶r̶ ̶s̶y̶s̶t̶e̶m̶.̶ ̶ ̶ ̶C̶o̶u̶l̶d̶ ̶y̶o̶u̶ ̶p̶l̶e̶a̶s̶e̶ ̶r̶u̶n̶ ̶'̶i̶w̶c̶o̶n̶f̶i̶g̶'̶ ̶a̶n̶d̶ ̶p̶o̶s̶t̶ ̶t̶h̶e̶ ̶o̶u̶t̶p̶u̶t̶ ̶h̶e̶r̶e̶?̶ See Medaths answer

Thank you so much!

from sysmon.

I have this exact same issue too, it happens when my wifi adapter is not connected to any network.

output of iwconfig wlp3s0 with no wifi connection:

wlp3s0    IEEE 802.11  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=16 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

output of iwconfig wlp3s0 with a wifi connection:

wlp3s0    IEEE 802.11  ESSID:"MyAP"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: aa:bb:cc:dd:ee:ff   
          Bit Rate=1 Mb/s   Tx-Power=16 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=61/70  Signal level=-49 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:99   Missed beacon:0

I peeked at your code and it's grepping iwconfig for "Bit Rate", which is not present when the adapter is not connected to a network, which means the processes list will be empty, causing the above issue.

I guess there should be a check somewhere to see if the adapter is connected to any network (grepping for ESSID:off/any?)

from sysmon.

Can also confirm it is working. Thanks!

from sysmon.