Comments (8)
attermann
commented on June 23, 2024
Here are logs after RST that show a normal boot after clearing the issue for reference.
ets Jul 29 2019 12:21:46
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (865) esp_core_dump_flash: No core dum����ѥѥ���found!
E (865) esp_core_dump_flash: No core dump partition found!
[ 12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[ 464][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
��@INFO | ??:??:?? 0
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (499712/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (53 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (88 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (1493 Bytes)
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0 /static/index-H3yz6dTg.js.gz (348 Bytes)
DEBUG | ??:??:?? 0 /static/index-cnVnppgi.css.gz (17208 Bytes)
DEBUG | ??:??:?? 0 /static/index-t3MYXjf0.js.gz (206869 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (545 Bytes)
DEBUG | ??:??:?? 1 /static/maplibre-gl-pS6olApQ.js.gz (208178 Bytes)
DEBUG | ??:??:?? 1 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 1 /static/site.webmanifest.gz (197 Bytes)
[ 1062][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
[ 1064][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 1068][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
INFO | ??:??:?? 1 AXP2101 PMU init succeeded, using AXP2101 PMU
[ 1100][D][XPowersAXP2101.tpp:2791] setInterruptImpl(): DISABLE - HEX:0xffffffff BIN:
DEBUG | ??:??:?? 1 =======================================================================
DEBUG | ??:??:?? 1 DC1 : + Voltage:3300 mV
DEBUG | ??:??:?? 1 DC2 : - Voltage:900 mV
DEBUG | ??:??:?? 1 DC3 : - Voltage:900 mV
DEBUG | ??:??:?? 1 DC4 : - Voltage:1100 mV
DEBUG | ??:??:?? 1 ALDO1: - Voltage:1800 mV
DEBUG | ??:??:?? 1 ALDO2: + Voltage:3300 mV
DEBUG | ??:??:?? 1 ALDO3: + Voltage:3300 mV
DEBUG | ??:??:?? 1 ALDO4: - Voltage:2900 mV
DEBUG | ??:??:?? 1 BLDO1: - Voltage:1800 mV
DEBUG | ??:??:?? 1 BLDO2: - Voltage:2800 mV
DEBUG | ??:??:?? 1 =======================================================================
DEBUG | ??:??:?? 1 Battery: usbPower=1, isCharging=0, batMv=4163, batPct=100
INFO | ??:??:?? 1 Scanning for i2c devices...
[ 1170][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 1 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 1 I2C device found at address 0x34
INFO | ??:??:?? 1 axp192/axp2101 PMU found
DEBUG | ??:??:?? 1 I2C device found at address 0x3c
INFO | ??:??:?? 1 ssd1306 display found
INFO | ??:??:?? 1 ssd1306 display found
DEBUG | ??:??:?? 1 0x4 subtype probed in 2 tries
INFO | ??:??:?? 1 2 I2C devices found
DEBUG | ??:??:?? 1 acc_info = 0
INFO | ??:??:?? 1 Meshtastic hwvendor=4, swver=2.2.16.1c6acfd
DEBUG | ??:??:?? 1 Setting random seed 77522584
DEBUG | ??:??:?? 1 Total heap: 185496
DEBUG | ??:??:?? 1 Free heap: 151108
DEBUG | ??:??:?? 1 Total PSRAM: 4192107
DEBUG | ??:??:?? 1 Free PSRAM: 4191847
DEBUG | ??:??:?? 1 NVS: UsedEntries 90, FreeEntries 540, AllEntries 630, NameSpaces 3
DEBUG | ??:??:?? 1 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 1 Number of Device Reboots: 22880
DEBUG | ??:??:?? 1 OTA firmware version 0.2.1.2fbe7fc
INFO | ??:??:?? 1 Initializing NodeDB
INFO | ??:??:?? 1 Loading /prefs/db.proto
INFO | ??:??:?? 1 Loaded saved devicestate version 22
INFO | ??:??:?? 1 Loading /prefs/config.proto
INFO | ??:??:?? 1 Loaded saved config version 22
[ 1338][E][vfs_api.cpp:105] open(): /littlefs/prefs/module.proto does not exist, no permits for creation
INFO | ??:??:?? 1 No /prefs/module.proto preferences found
INFO | ??:??:?? 1 Installing default ModuleConfig
INFO | ??:??:?? 1 Loading /prefs/channels.proto
INFO | ??:??:?? 1 Loaded saved channelFile version 22
[ 1380][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 1 No /oem/oem.proto preferences found
DEBUG | ??:??:?? 1 cleanupMeshDB purged 0 entries
WARN | ??:??:?? 1 Using nodenum 0x7a6c69c4
DEBUG | ??:??:?? 1 Number of Device Reboots: 22880
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO | ??:??:?? 1 Wanted region 1, using US
DEBUG | ??:??:?? 1 region=1, NODENUM=0x7a6c69c4, dbsize=16
INFO | ??:??:?? 1 Saving /prefs/db.proto
WARN | ??:??:?? 1 SPI.begin(SCK=5, MISO=19, MOSI=27, NSS=18)
DEBUG | ??:??:?? 1 Read RTC time as 1
INFO | ??:??:?? 1 Setting GPS power=1
DEBUG | ??:??:?? 1 WANT GPS=1
INFO | ??:??:?? 1 Setting GPS power=1
DEBUG | ??:??:?? 1 Using GPIO34 for GPS RX
DEBUG | ??:??:?? 1 Using GPIO12 for GPS TX
DEBUG | ??:??:?? 1 NeighborInfoModule is disabled
INFO | ??:??:?? 1 External Notification Module Disabled
INFO | ??:??:?? 1 Turning on screen
DEBUG | ??:??:?? 1 Module wants a UI Frame
DEBUG | ??:??:?? 1 Module wants a UI Frame
WARN | ??:??:?? 1 RF95Interface(cs=18, irq=26, rst=23, busy=33)
INFO | ??:??:?? 1 Starting meshradio init...
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO | ??:??:?? 1 Radio freq=906.875, config.lora.frequency_offset=0.000
INFO | ??:??:?? 1 Set radio: region=US, name=LongFast, config=0, ch=19, power=30
INFO | ??:??:?? 1 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)
INFO | ??:??:?? 1 Radio myRegion->numChannels: 104 x 250.000kHz
INFO | ??:??:?? 1 Radio channel_num: 20
INFO | ??:??:?? 1 Radio frequency: 906.875000
INFO | ??:??:?? 1 Slot time: 42 msec
INFO | ??:??:?? 1 Set radio: final power level=20
DEBUG | ??:??:?? 1 Current limit set to 100.000000
DEBUG | ??:??:?? 1 Current limit set result 0
INFO | ??:??:?? 1 RF95 init result 0
INFO | ??:??:?? 1 Frequency set to 906.875000
INFO | ??:??:?? 1 Bandwidth set to 250.000000
INFO | ??:??:?? 1 Power output set to 20
INFO | ??:??:?? 1 RF95 Radio init succeeded, using RF95 radio
INFO | ??:??:?? 1 Not using WIFI
DEBUG | ??:??:?? 1 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=237, time 2000 ms
DEBUG | ??:??:?? 1 LoRA bitrate = 118.500000 bytes / sec
INFO | ??:??:?? 1 PowerFSM init, USB power=0
DEBU���??:??:?? 1 Enter state: BOOT
[ 1857][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 320 / 4 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 1 [Power] Battery: usbPower=1, isCharging=0, batMv=4163, batPct=100
DEBUG | ??:??:?? 1 [Screen] Screen: Started...
DEBUG | ??:??:?? 1 [GPS] WANT GPS=0
INFO | ??:??:?? 1 [GPS] Setting GPS power=0
INFO | ??:??:?? 1 [RangeTestModule] Range Test Module - Disabled
DEBUG | ??:??:?? 4 [PowerFSM] Enter state: ON
INFO | ??:??:?? 4 [PowerFSM] Initialise the NimBLE bluetooth module
INFO | ??:??:?? 6 [PowerFSM] Turning off screen
INFO | ??:??:?? 8 [PowerFSM] lsEnter begin, ls_secs=86400
INFO | ??:??:?? 9 [PowerFSM] Disable bluetooth
INFO | ??:??:?? 22 [PowerFSM] Exit light sleep gpio: btn=0
INFO | ??:??:?? 22 [PowerFSM] wakeCause2 7
INFO | ??:??:?? 22 [PowerFSM] Exit state: LS
DEBUG | ??:??:?? 22 [PowerFSM] Enter state: NB
INFO | ??:??:?? 22 [PowerFSM] Disable bluetoothfrom firmware.
mverch67
commented on June 23, 2024
Interrupt wdt timeout on CPU1 means that a long-running action may be executed inside an interrupt handler (e.g. serial print) which is bad and can lead to arbitrary errors, in this case a timeout exception is triggered and then panic with reboot.
from firmware.
geeksville
commented on June 23, 2024
This issue has been mentioned on Meshtastic. There might be relevant details there:
https://meshtastic.discourse.group/t/lilygo-t-bean-supreme-s3-boot-loop/9517/2
from firmware.
donniefitz2
commented on June 23, 2024
I created the forum post mentioned above. In my case, with the T-Beam Supreme, the device enters the boot loop as soon as it restarts after being set to the Router role. I will get the log output and add it here soon.
from firmware.
donniefitz2
commented on June 23, 2024
It turns out that I can't post logs because I can't get the device out of the boot loop. The only way to recover is to flash the device.
from firmware.
Wrrrrt
commented on June 23, 2024
I have the same issue in Routermode with Tbeam v1.1 and 2.2.23.
It always crashes after a while, sometimes after hours, sometimes after minutes.
I have two TBeams running for testing and both are crashing.
//\ E S H T /\ S T / C
INFO | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (520192/1048576 Bytes):
DEBUG | ??:??:?? 0 /prefs/channels.proto (98 Bytes)
DEBUG | ??:??:?? 0 /prefs/config.proto (94 Bytes)
DEBUG | ??:??:?? 0 /prefs/db.proto (739 Bytes)
DEBUG | ??:??:?? 0 /prefs/module.proto (109 Bytes)
DEBUG | ??:??:?? 0 /static/.gitkeep (0 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_Black.svg.gz (602 Bytes)
DEBUG | ??:??:?? 0 /static/Logo_White.svg.gz (610 Bytes)
DEBUG | ??:??:?? 0 /static/apple-touch-icon.png.gz (3164 Bytes)
DEBUG | ??:??:?? 0 /static/favicon.ico.gz (2270 Bytes)
DEBUG | ??:??:?? 0 /static/icon.svg.gz (852 Bytes)
DEBUG | ??:??:?? 0 /static/index-0AMga6GL.js.gz (232508 Bytes)
DEBUG | ??:??:?? 0 /static/index-H3yz6dTg.js.gz (348 Bytes)
DEBUG | ??:??:?? 0 /static/index-SK2yn6IJ.css.gz (16116 Bytes)
DEBUG | ??:??:?? 0 /static/index.html.gz (550 Bytes)
DEBUG | ??:??:?? 1 /static/maplibre-gl-bXi9LezG.js.gz (208177 Bytes)
DEBUG | ??:??:?? 1 /static/robots.txt.gz (42 Bytes)
DEBUG | ??:??:?? 1 /static/site.webmanifest.gz (197 Bytes)
[ 1044][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
[ 1046][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 1050][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
WARN | ??:??:?? 1 Failed to find AXP2101 power management
[ 1069][I][XPowersAXP2101.tpp:230] ~XPowersAXP2101(): ~XPowersAXP2101
[ 1069][I][XPowersCommon.tpp:248] begin(): SDA:21 SCL:22
[ 1073][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=21 scl=22 freq=100000
INFO | ??:??:?? 1 AXP192 PMU init succeeded, using AXP192 PMU
[ 1099][D][XPowersAXP192.tpp:2010] setInterruptImpl(): setInterruptImpl DISABLE - 0xffffffffff
DEBUG | ??:??:?? 1 =======================================================================
DEBUG | ??:??:?? 1 DC1 : + Voltage:3300 mV
DEBUG | ??:??:?? 1 DC2 : - Voltage:1800 mV
DEBUG | ??:??:?? 1 DC3 : + Voltage:3300 mV
DEBUG | ??:??:?? 1 LDO2 : + Voltage:3300 mV
DEBUG | ??:??:?? 1 LDO3 : + Voltage:3300 mV
DEBUG | ??:??:?? 1 =======================================================================
DEBUG | ??:??:?? 1 Battery: usbPower=1, isCharging=1, batMv=3958, batPct=77
INFO | ??:??:?? 1 Scanning for i2c devices...
[ 1154][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 1 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 1 I2C device found at address 0x34
INFO | ??:??:?? 1 axp192/axp2101 PMU found
INFO | ??:??:?? 1 1 I2C devices found
DEBUG | ??:??:?? 1 acc_info = 0
INFO | ??:??:?? 1 Meshtastic hwvendor=4, swver=2.2.23.5672e68
DEBUG | ??:??:?? 1 Setting random seed 3939995171
DEBUG | ??:??:?? 1 Total heap: 178304
DEBUG | ??:??:?? 1 Free heap: 143884
DEBUG | ??:??:?? 1 Total PSRAM: 4192107
DEBUG | ??:??:?? 1 Free PSRAM: 4191847
DEBUG | ??:??:?? 1 NVS: UsedEntries 70, FreeEntries 560, AllEntries 630, NameSpaces 3
DEBUG | ??:??:?? 1 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 1 Number of Device Reboots: 22361
DEBUG | ??:??:?? 1 OTA firmware version 0.2.1.2fbe7fc
INFO | ??:??:?? 1 Initializing NodeDB
INFO | ??:??:?? 1 Loading /prefs/db.proto
INFO | ??:??:?? 1 Loaded saved devicestate version 22
INFO | ??:??:?? 1 Loading /prefs/config.proto
INFO | ??:??:?? 1 Loaded saved config version 22
INFO | ??:??:?? 1 Loading /prefs/module.proto
INFO | ??:??:?? 1 Loaded saved moduleConfig version 22
INFO | ??:??:?? 1 Loading /prefs/channels.proto
INFO | ??:??:?? 1 Loaded saved channelFile version 22
[ 1435][E][vfs_api.cpp:105] open(): /littlefs/oem/oem.proto does not exist, no permits for creation
INFO | ??:??:?? 1 No /oem/oem.proto preferences found
DEBUG | ??:??:?? 1 cleanupMeshDB purged 0 entries
WARN | ??:??:?? 1 Using nodenum 0x8487e1a4
DEBUG | ??:??:?? 1 Number of Device Reboots: 22361
DEBUG | ??:??:?? 1 Expanding short PSK #1
INFO | ??:??:?? 1 Wanted region 3, using EU_868
DEBUG | ??:??:?? 1 region=3, NODENUM=0x8487e1a4, dbsize=9
INFO | ??:??:?? 1 Saving /prefs/db.proto
DEBUG | ??:??:?? 1 Using GPIO38 for button
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
Core 1 register dump:
PC : 0x40081c8d PS : 0x00050035 A0 : 0x40086f5c A1 : 0x3ffbfd2c
A2 : 0x3ff44000 A3 : 0x3ffbe350 A4 : 0x80084914 A5 : 0x40097e56
A6 : 0x3ffbc948 A7 : 0x00000804 A8 : 0x00000001 A9 : 0x3ffbfd0c
A10 : 0x00000000 A11 : 0x00000000 A12 : 0x00000001 A13 : 0x3ffb78f0
A14 : 0x3ffbc948 A15 : 0x0000000c SAR : 0x00000006 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x400933cc LEND : 0x400933d7 LCOUNT : 0xffffffff
Core 1 was running in ISR context:
EPC1 : 0x4014eadb EPC2 : 0x00000000 EPC3 : 0x00000000 EPC4 : 0x00000000
Backtrace: 0x40081c8a:0x3ffbfd2c |<-CORRUPTED
Core 0 register dump:
PC : 0x4022c0fe PS : 0x00060835 A0 : 0x8014d3d8 A1 : 0x3ffbce30
A2 : 0x00000000 A3 : 0x80000001 A4 : 0x8009ba0c A5 : 0x3ffbcd50
A6 : 0x00000003 A7 : 0x00060023 A8 : 0x8014cf1a A9 : 0x3ffbce00
A10 : 0x00000000 A11 : 0x80000001 A12 : 0x8009ba0c A13 : 0x3ffbcd30
A14 : 0x00000003 A15 : 0x00060023 SAR : 0x0000001d EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Backtrace: 0x4022c0fb:0x3ffbce30 0x4014d3d5:0x3ffbce50 0x40099384:0x3ffbce70
ELF file SHA256: 6dc29cd95c3c96f2
E (2385) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jul 29 2019 12:21:46
rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (841) esp_core_dump_flash: No core dum?????????found!
E (841) esp_core_dump_flash: No core dump partition found!
[ 12][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 2 = 240 Mhz, APB: 80000000 Hz
[ 464][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
WARNING file:mesh_interface.py _sendToRadio line:681 Not sending packet because protocol use is disabled by noProto
INFO | ??:??:?? 0
//\ E S H T /\ S T / C
from firmware.
mverch67
commented on June 23, 2024
There is hope... I could reproduce this issue!
from firmware.
Felix-Quehl
commented on June 23, 2024
I have the same issue. The device works fine in client mode, but as soon as I set it into repeater or router mode it cycles in a crash/boot loop and is not working.
I tried firmware version
2.3.92.3.72.3.52.3.42.3.3
I created a additional issue in the LilyGo repo: Xinyuan-LilyGO/LilyGo-LoRa-Series#161
Note: I am using EU_868 as LoRa region, and I reproduced it on a T-Beam and a T-Beam Supreme.
from firmware.
Related Issues (20)
- [Bug]: ESP32 goes into error after uploading VS CODE HOT 17
- [Feature Request]: Regulatory gain setting for BLE HOT 6
- [Bug]: LILYGO Lora V2.1-1.6 does not shutdown on 0% battery HOT 1
- [Feature Request]: Proposal of new role HOT 2
- [Feature Request]: Increase of speed
- [Feature Request]: Templates for custom boards HOT 2
- [Bug]: M5 Stack firmware not working with ESP32-S3 version of the M5 Stack
- Request for new definition to support Ebyte E22 modules[Board]: HOT 1
- [Bug]: Triple-click behaviour for GPS doesn't work as expected HOT 3
- [Feature Request]: Option to limit traffic based on original hop settings HOT 7
- [Bug]: rak4631 shutting down from keypress that never happened HOT 4
- [Feature Request]: Setting to configure a periodic reboot HOT 6
- [Feature Request]: Report altitude from pressure HOT 5
- [Feature Request]: Use DOP from GPS devices to determine if we have a good enough position to save airtime HOT 1
- [Bug]: No way to change recipient when typing message on T-Deck HOT 1
- [Board]: Flipper zero (with Lora module) HOT 2
- [Bug]: PicoW GPS Firmware HOT 1
- [Feature Request]: Add a module for "Device intrusion" HOT 1
- [Bug]: Pico W "integer too large" then crash HOT 3
- [Bug]: Factory reset not actually resetting node. HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from firmware.