Error 73 about mi899 HOT 7 CLOSED

You can get rid of the 73 code by disabling Windows Fast Boot: How To Disable Fast Startup in Windows 10.

from mi899.

You can get rid of the 73 code by disabling Windows Fast Boot: How To Disable Fast Startup in Windows 10.

Confirmed.
With fastboot off error 73 is no longer present. Two days testing. Just AA now.
Also fixed a problem that windows was booting twice, after a shutdown, to load the OS.
Cheerz miyconst.

from mi899.

Hi @popers. I have exactly the same behavior with all tested Huananzhi X99-TF/F8 and JingSha X99-D8 boards. Since this "issue" does not really affect the performance, I don't think you should bother about it.

Myself, I was not able to solve it either.

from mi899.

Same here.
Machinist x99-MR9D PLUS + 2690v3
First boot Error 73. After first boot (second reboot and others) no more 73... Just AA.
Did not notice any performance issue like miyconst said.
Cheerz.

from mi899.

Its a cirquit fault.
Wrong jumper.
If changed the usb powert power on all time or to S0 you must remove topplate on back side and also changed usb ports there.

Other it gives 73 and later D3 failed Dx/Dd, followed by D6 ( no graphics card detect) initilizing is to long

from mi899.

If changed the usb powert power on all time or to S0 you must remove topplate on back side and also changed usb ports there.

Do you have any pictures?

from mi899.

If changed the usb powert power on all time or to S0 you must remove topplate on back side and also changed usb ports there.

Do you have any pictures?

Here a link in i think russian ( i use translate)
On sleep state there are jpwr 1 for front and under the plate are jpwr2
There are also picrurea fron

I use this motherboard with no DSDT or SSDT in opencore and all works ok.
Its also the jumper for internal USB switch to NGFF bluetooth

from mi899.