Comments (21)
Try to use advanced mode and set a custom remote node. You can go to the main menu by clicking on the exit symbol in the top left corner.
Then click on "Change wallet mode" and select "Advanced mode". Afterwards open your wallet again, go to Settings -> Node, select "Remote node" and enter the following node:
address: selsta2.featherwallet.net
port: 18081
This should resolve your issue for now. No extra hard disk space required and no issues with monerod not starting.
Other remote node in case the above has issues:
address: selsta1.featherwallet.net
port: 18081
address: node.community.rino.io
port: 18081
More nodes: nodes.monero.com
After that try to change the height again and do a full rescan. If you still have issues afterwards I will give you further steps.
from monero-gui.
Great :) Now make a backup of the wallet file and you can also try flatpak again if you prefer that. Closing as the issue seems resolved.
from monero-gui.
Try to use the binaries from getmonero.org instead of flatpak.
from monero-gui.
Hi,
What would be the procedure to use them ?
I'm not so expereienced....
Thanks
from monero-gui.
You download the Linux GUI, extract it and then open ./monero-wallet-gui
from the command line.
from monero-gui.
user@host:~$ flatpak run org.getmonero.Monero
(monero-wallet-gui:2): dbind-WARNING **: 11:20:20.235: AT-SPI: Error retrieving accessibility bus address: org.freedesktop.DBus.Error.ServiceUnknown: org.freedesktop.DBus.Error.ServiceUnknown
Qt: Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
2023-09-03 11:20:21.485 W Qt:5.15.10 GUI:- | screen: 1920x977 - available: QSize(1920, 946) - dpi: 96.0926 - ratio:0.750724
2023-09-03 11:20:30.240 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:20:30.241 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:20:30.241 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:24:15.984 W Transaction extra has unsupported format: <2ad602c5f8f0c7118ec7cebe473d5f90d8c8d63407ec36d2a93e67709eaec317>
2023-09-03 11:24:15.984 W Transaction extra has unsupported format:
2023-09-03 11:24:15.984 W Transaction extra has unsupported format: <7847647ae92787d3352bd9195aa606f992f8aeaa203b0e34ed238fec34ad2cdb>
2023-09-03 11:24:15.984 W Transaction extra has unsupported format: <8df45aa8d4a49bfe19286178403473be287ca0637a1721adf02ad2692e4ac966>
2023-09-03 11:24:15.985 W Transaction extra has unsupported format: <8917dd6288336d809c6c9a28edc7328d897de7b0dca77158549ec1c077a19314>
2023-09-03 11:24:30.292 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2023-09-03 11:24:30.526 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:24:30.526 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:25:20.686 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2023-09-03 11:25:20.776 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2023-09-03 11:25:20.777 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2023-09-03 11:25:20.778 E pull_blocks failed, try_count=3
:(
`
from monero-gui.
Did you post the correct logs? You are again starting flatpak instead of the release binaries manually.
- Download the Linux GUI: https://downloads.getmonero.org/gui/linux64
- Extract the .zip
- Open the command line,
cd
to the folder - Start the binary with
./monero-wallet-gui
There is no flatpak involved here.
from monero-gui.
You are correct.
Let's see for now I get :
user@host:~/Monero/monero-gui-v0.18.2.2$ ./monero-wallet-gui
2023-09-03 11:29:22.879 W Qt:5.15.8 GUI:- | screen: 1920x977 - available: QSize(1920, 946) - dpi: 96.0926 - ratio:0.750724
2023-09-03 11:29:28.921 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:28.921 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:28.921 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:28.921 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:30.267 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:30.267 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:30.267 W Qt Quick Layouts: Detected recursive rearrange. Aborting after two iterations.
2023-09-03 11:29:30.646 W Logging to "/home/user/.bitmonero/monero-wallet-gui.log"
2023-09-03 11:29:30.650 W qrc:/qt-project.org/imports/QtQuick/Controls/ApplicationWindow.qml:259:9: QML ContentItem: Binding loop detected for property "implicitWidth"
2023-09-03 11:30:11.730 W Loaded wallet keys file, with public address:
2023-09-03 11:30:26.895 I Monero 'Fluorine Fermi' (v0.18.2.2-release)
Forking to background...
from monero-gui.
The logs don't show anything interesting. Does it crash to the point where the GUI closes itself?
from monero-gui.
It doesn't start syncing at the present moment
And again :
023-09-03 11:32:24.452 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2023-09-03 11:32:28.265 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.314 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.459 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.459 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.493 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.494 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.494 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.496 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.497 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.498 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.498 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.499 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.499 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.501 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.501 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.501 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.502 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.503 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.503 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:28.504 E daemonBlockChainTargetHeight: Failed to connect to daemon
2023-09-03 11:32:28.505 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:29.550 E daemonBlockChainHeight: Failed to connect to daemon
2023-09-03 11:32:59.821 I Monero 'Fluorine Fermi' (v0.18.2.2-release)
Forking to background...
2023-09-03 11:33:39.131 I Monero 'Fluorine Fermi' (v0.18.2.2-release)
Forking to background...
from monero-gui.
Deleted again my wallet and restored it.
Also deleted /.bitmonero folder again
launched monero-gui-v0.18.2.2$ ./monero-wallet-gui
Syncing...
Let's wait but I suppose it will crash again soon or later...
from monero-gui.
Can you go to Settings -> Info and share your Wallet mode?
from monero-gui.
Wallet mode: Simple mode
Graphics mode: Low graphics mode
from monero-gui.
Connected.... syncing...
Will update !
Thanks for your assistance 👍
from monero-gui.
Acutually I have the following :
2023-09-03 13:44:14.027 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 13:45:41.136 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 14:17:13.716 E Failed to derive subaddress public key
2023-09-03 14:19:28.699 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 14:19:28.880 E Failed to derive subaddress public key
2023-09-03 14:20:34.361 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 14:22:39.803 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 14:22:48.246 E Failed to derive subaddress public key
2023-09-03 14:22:51.099 E Failed to derive subaddress public key
2023-09-03 14:23:07.992 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 14:23:08.469 E Failed to derive subaddress public key
Keep wainting...
from monero-gui.
When was the first time you received XMR into this wallet?
from monero-gui.
When was the first time you received XMR into this wallet?
Some years ago
EDIT : let's wait a few more time
EDIT 2 : years instead of months
from monero-gui.
Still syncing but :
2023-09-03 15:37:23.562 W Transaction extra has unsupported format:
2023-09-03 15:37:23.878 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 15:42:11.671 W Failed to generate key derivation from tx pubkey, skipping
2023-09-03 15:58:39.919 W Transaction extra has unsupported format: <97ef64005b33f2ff9764b5537ad565159bc95419b07a3070e90a63ac7f5c9988>
2023-09-03 15:58:39.923 W Transaction extra has unsupported format: <58013973b0ccbf74d2d4ecca6d46356655bc27d1ef7649a02212ee670f853048>
😣
from monero-gui.
Is this a view only wallet? Also I would let it sync up first, these messages are just warnings and don't necessarily indicate that something is wrong.
from monero-gui.
Yes it is. Agree with you, let's finish the synchronization 👍
EDIT : if that finishes, but fingers crossed 🤞
from monero-gui.
Achieved 🙏🚀💪🥂
Thank you so much for your help @selsta 🥳
from monero-gui.
Related Issues (20)
- Message signatures with view-only wallets broken, despite support in CLI / RPC HOT 2
- Montero gui
- HELP ME WITH MONERO PLEASE HOT 2
- monero gui not showing balance HOT 1
- MoneroD initializes cryptonote protocol HOT 1
- Link to MacOS ARM goes to intel version for the v0.18.3.1 release HOT 3
- Trezor Safe 3 launch HOT 3
- REDACTED FOR PRIVACY HOT 10
- Monero transaction stuck as sent in the GUI HOT 8
- start of monerod gives "Segmentation fault (core dumped)" on Archlinux HOT 5
- No update when latest version is 0.18.3.1? HOT 1
- Cant interact with wallet due to "Login error" HOT 1
- Warning "Passing incompatible arguments to C++ functions from JavaScript is dangerous and deprecated. HOT 1
- P2Pool keeps stopping after loading peers from seeds.p2pool.io HOT 24
- GUI hangs if `monerod` cannot bind HOT 2
- change amount in euro and XMR
- Choice of Where to Download the Blockchain HOT 3
- More flexible p2pool installation scenarios on Linux HOT 1
- start p2pool crashes local node
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from monero-gui.