Stuck on 22.05 about pfatt HOT 2 OPEN

Update:

I upgraded to 23.09.1 and changed to using the method detailed here. However, wpa_cli status reports "connecting" and "unauthorized". The exact same hardware and certs authenticate fine on 22.05 using the old pfatt wpa_supplicant script. Any recommendations?

from pfatt.

Here is the syslog output:

Dec 23 08:38:29 pfsense pfatt[63277]: starting wpa_supplicant... Dec 23 08:38:29 pfsense wpa_supplicant[63663]: Successfully initialized wpa_supplicant Dec 23 08:38:33 pfsense pfatt[71584]: wpa_supplicant running on PID 70876... Dec 23 08:38:33 pfsense pfatt[72244]: setting wpa_supplicant network configuration... Dec 23 08:38:33 pfsense wpa_supplicant[70876]: igb0: Associated with 01:80:c2:00:00:03 Dec 23 08:38:33 pfsense wpa_supplicant[70876]: igb0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 Dec 23 08:39:34 pfsense wpa_supplicant[70876]: igb0: CTRL-EVENT-EAP-FAILURE EAP authentication failed Dec 23 08:39:48 pfsense wpa_supplicant[70876]: igb0: CTRL-EVENT-EAP-STARTED EAP authentication started

And here is the output from wpa_cli status:

`wpa_cli status
Selected interface 'igb0'
bssid=01:80:c2:00:00:03
freq=0
ssid=
id=0
mode=station
pairwise_cipher=NONE
group_cipher=NONE
key_mgmt=IEEE 802.1X (no WPA)
wpa_state=ASSOCIATED
address=74:8a:0d:5f:be:21
Supplicant PAE state=CONNECTING
suppPortStatus=Unauthorized
EAP state=IDLE
uuid=666db3f9-54bb-5d96-8859-3fd4bbaa9546

wpa_cli status
Selected interface 'igb0'
bssid=01:80:c2:00:00:03
freq=0
ssid=
id=0
mode=station
pairwise_cipher=NONE
group_cipher=NONE
key_mgmt=IEEE 802.1X (no WPA)
wpa_state=ASSOCIATED
address=74:8a:0d:5f:be:21
Supplicant PAE state=HELD
suppPortStatus=Unauthorized
EAP state=FAILURE
uuid=666db3f9-54bb-5d96-8859-3fd4bbaa9546`

from pfatt.