Add debounce to push button about minible HOT 13 OPEN

there's actually already a debounce: https://github.com/mooltipass/minible/blob/master/source_code/main_mcu/src/INPUTS/inputs.c#L275, set to 100ms

from minible.

there's actually already a debounce: https://github.com/mooltipass/minible/blob/master/source_code/main_mcu/src/INPUTS/inputs.c#L275, set to 100ms

Nice.
Since different unit may have different tolerances, would it be better if we can customise it?
If not can we increase to maybe 150ms-200ms, to reduce this issue further?

from minible.

that's indeed a great idea!

from minible.

might this be the same reason why i sometimes dont get a wheel move when moving quickly through the numbers when trying to enter my pin?

from minible.

not exactly no

from minible.

I have this issue with my early unit, it seems the scroll wheel starts to do this after lots of use. This will just get worse and worse until the wheel stops working. I've replaced this unit with a new one that I think has a better scroll wheel installed. The new one doesn't exhibit any issues but it's only been 6 months.

from minible.

Hello, are you saying you aren't able to click anymore?

from minible.

I got same problem

from minible.

@seviu : can you expand on your symptoms? :)

from minible.

@limpkin I can click but it will sometimes scroll at the same time. Just touching the scroll wheel lightly will sometimes make it scroll very quickly in one direction or the other. If I push down on the scroll wheel while clicking it works much better. This leads me to think the issue is hardware, the scroll wheel has failed and the contacts and/or wheel are lose. I have a very early unit and I use it all the time so perhaps the scroll wheel part isn't robust enough.

from minible.

@CGuy-1 is this still happening? I could offer a device swap...

from minible.

Yes, I suspect the scroll wheel contacts are broken or worn out. This is an early unit and I use it all the time so it may just need a new scroll wheel component. The battery doesn't hold a charge any more (and yes I've run the refresh several times), is it possible to replace it?

from minible.

send me a quick email, we'll work something out :)

from minible.