Tested devices about zigbeenet HOT 10 CLOSED

Hi,
I've watching this project since the beginning. I am coding a .NET Smarthome-Broker (it's currently not ready for the public). Nowaday I am using Zigbee2Mqtt to integrate Zigbee-Devices, but I am looking forward to integrate ZigbeeNet. I did some tests with my XIAOMI-(Temperature, Humidity, Pressure) Sensor and I am able to get the values as expected.
Now my Question: What is the correct way to natively support new devices in ZigbeeNet <- I don't know where to start in the code (which classes have to be extended).
Maybe you can give me a fast intro on how to support new devices (I can test Tradfri, Heiman Smoke detector and Xiami Temperature Sensors at this time).

from zigbeenet.

I got my Ikea Tradfri lamp working in combination with my CC2531 usb stick.

from zigbeenet.

I have a CC2531 usb stick and got Following devices working:

• Ikea E14 Tradfri lamp (On/Off, Dimming)
• Osram Smart+ Plug (On/Off)
• Osram Smart+ E27 Color LED (On/Off, Dimming, Change Color)

from zigbeenet.

Hi @Mr-Markus i have a CC2531 device .
But it does not show as a com port.

I have installed the drivers. It looks ok on device manager and sniffer tool works with it .
But what ever i do it does not show as com port.

when ever it try to run this code it says invalid state.

Any suggestion.

from zigbeenet.

Hi @sixty-four-bit,
thanks for your interest in our library.

You have to flash the ZNP (ZigbeeNetworkProcessor) firmware from the Z-Stack directory :
\Z-Stack 3.x\Projects\zstack\ZNP\CC253x\dev\CC2531ZNP-with-SBL.hex

Are you able to flash it? You will need CCDebugger hardware to do it.

from zigbeenet.

@andreasfedermann
Which devices did you have used until now with your XBee hardware?

from zigbeenet.

Coordinator
Digi Xbee
Product Family: XB24C S2C
Function Set: ZIGBEE TH Reg
Firmware: 4060

Smart Devices

• Philips hue light bulb white ambiance (On/Off, Dimming, Change Color)
• hue white and color ambiance go portable light (in progress)
• hue white ambiance fair ceiling light (in progress)

from zigbeenet.

Hi @bmachuletz ,

thanks for your interest in our library. That sounds great! I will be very interested in your project and looking forward to it.

I have wrote some articles in our wiki page.

Getting Started
Get node and endpoint address
Read attributes
How to control devices

You can also take a look at the Playground Demo project

If you need further information I will help you whenever you need it. Just open an new issue for it.

from zigbeenet.

If there are any new devices you have tested just open a new issue

from zigbeenet.

I can confirm that the Aqara Occupancy and Illuminance sensor (RTCGQ11LM) is working using the IlluminanceLevelSensingCluster and the OccupancySensingCluster.

from zigbeenet.