Missing Units about modelicabook HOT 6 OPEN

Also an issue in plots with the following titles:

• Comparison of actual speed with sampled speed
• Comparison of actual speed with approximation by interval measurement (there are four of these with different intervals!)
• Comparison of actual speed with approximation by pulse counting
• Temperature solution
• Closed loop temperature response
• Closed loop temperature response with high gain
• Comparison of required actuator heat output
• Concentrations of A, B and X

from modelicabook.

And here:

• Gear response, with and without backlash
• Response of hierarchical gear system with backlash

from modelicabook.

And here:

• Flat power supply circuit

from modelicabook.

And here:

• System with power supply component

from modelicabook.

And here:

• Power supply component with additional load
• Effect of very large capacitance

from modelicabook.

And here:

• Sensor measurement
• Comparison of segmentation
• Pendulum angles
• Response using ideal sensor
• Response using a sample and hold sensor
• Response with hold time of 0.01
• Response with hold time of 0.036
• Response using PID control
• Response using a tuned PID controller
• Response using PI controller
• Furnace heat using PI controller
• Response using PI controller in expandable architecture
• Response using PI bang-bang control
• Response using PI bang-bang control with hysteresis

from modelicabook.