Comments (12)
hamiltoncj
commented on June 9, 2024
@AkiaSIG This is a strange error. The error message appears to be saying that your input layer is invalid. Is it possible to share a vector layer that causes this problem? Is this being used in a model or just from one of your layers?
from qgis-kmltools-plugin.
AkiaSIG
commented on June 9, 2024
Hello, good to hear your answer ...
The vector layer is joined with a table. Could it be the reason ?
I'll try with another layer with no join ...
Thanks
from qgis-kmltools-plugin.
hamiltoncj
commented on June 9, 2024
I see a potential problem if the input source is a table and not a vector layer. I don't know if that is what was input, but I am going to include some checking to make sure that the input is a point, line, or polygon layer and if it is not then warn the user.
from qgis-kmltools-plugin.
AkiaSIG
commented on June 9, 2024
Hello,
The table is joined on a point file. So I did not request to build a kml on the table but on the point file.
I didn't take the time to try with another layer but I'll try as soon as possible.
Thanks again for your answers.
Take care, Philippe
from qgis-kmltools-plugin.
hamiltoncj
commented on June 9, 2024
It would be very helpful if you could provide some data and the steps that you took to generate the error.
from qgis-kmltools-plugin.
AkiaSIG
commented on June 9, 2024
Ok, I'll send it to you. That would be on this week end. Sorry ...
Thanks again for your support. We will find out why.
Take care, Philippe
from qgis-kmltools-plugin.
hamiltoncj
commented on June 9, 2024
I updated KML Tools to 3.1.4. Although I cannot replicate your error, it has a check in it to make sure the input vector layer is in the correct format. See if you still have the same problem or not with this version.
Thanks!
from qgis-kmltools-plugin.
AkiaSIG
commented on June 9, 2024
Hello,
I've just tried with a polygon layer with the same error. I've updated to
3.1.5 from github.
It looks the error is the same, and, as often, the error may be mine ...
So you will find the polygon layer in this mail.
Could you please destroy these data when finished because I should not
share any of this ...
Thanks for the support.
Philippe
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Le mer. 17 févr. 2021 à 20:36, C Hamilton <[email protected]> a
écrit :
I updated KML Tools to 3.1.4. Although I cannot replicate your error, it
has a check in it to make sure the input vector layer is in the correct
format. See if you still have the same problem or not with this version.
Thanks!
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ASZ7U6CF7MGQZOSJAI2RGIDS7P5ABANCNFSM4XOQ5NPQ>
.
QGIS version: 3.10.14-A Coruña
QGIS code revision: 8374282d2a
Qt version: 5.11.2
GDAL version: 3.1.4
GEOS version: 3.8.1-CAPI-1.13.3
PROJ version: Rel. 6.3.2, May 1st, 2020
Processing algorithm…
Algorithm 'Export KMZ' starting…
Input parameters:
{ 'AltitudeField' : None, 'AltitudeInterpretation' : 1, 'AltitudeMode' : 0, 'AltitudeModeField' : None, 'DateBeginField' : None, 'DateEndField' : None, 'DateStampField' : None, 'DateTimeBeginField' : None, 'DateTimeEndField' : None, 'DateTimeStampField' : 'Survey', 'DescriptionField' : ['Plot ID','Surf_Acres','NOC','Part','Site Name','Len','Surf_m'], 'ExportStyle' : True, 'InputLayer' : QgsProcessingFeatureSourceDefinition('_WS_Plots_U_0a8274f5_bd2b_46ea_8308_26a1b06564f5', True), 'LineWidthFactor' : 2, 'NameField' : 'Plot ID', 'OutputKmz' : 'C:/GIS/_EXPORTS/_KML_/Nouveau dossier/Area_NOC-1.kmz', 'TimeBeginField' : None, 'TimeEndField' : None, 'TimeStampField' : None, 'UseGoogleIcon' : None }
Traceback (most recent call last):
File "C:/Users/Philippe/AppData/Roaming/QGIS/QGIS3\profiles\default/python/plugins\kmltools\exportKmz.py", line 329, in processAlgorithm
self.render = layer.renderer()
AttributeError: 'NoneType' object has no attribute 'renderer'
Execution failed after 0.05 seconds
Loading resulting layers
Algorithm 'Export KMZ' finished
from qgis-kmltools-plugin.
hamiltoncj
commented on June 9, 2024
@AkiaSIG That error really shouldn't happen so this is really strange. The NoneType says that there is not a valid layer input, but I am surprised that my checks at the beginning didn't catch it.
Go to the KML Tools plugin page https://plugins.qgis.org/plugins/kmltools/ and click on the Details tab and that will give you an email address to send your data to. It didn't come through onto the GitHub site.
One thing you can try with QGIS is to right mouse click on your layer that is causing problems. Select "Properties..." In the Layer Properties popup select the "Information" tab on the left. Copy the text about "Information from provider" and send it to me.
Thanks! I will eventually figure this out.
from qgis-kmltools-plugin.
hamiltoncj
commented on June 9, 2024
Please update to KML Tools 3.1.6 and let me know if this has been fixed or not. You wont get this error again, but you might get some message.
from qgis-kmltools-plugin.
AkiaSIG
commented on June 9, 2024
Hello,
Ok, I've updated to the 3.1.6 version and it seems to work but the "kmz"
file is not loaded and when I choose a file and I load it in QGIS it's not
showed as a spatial file.
Sad because the fields looks ok to me !
You will find the "layer Informations" in a texte file attached.
My file as changed (I've joined some entities) so I send it.
Though I'm using your tool with another layer (point) ...
Thanks again for your support.
Have a good week end,
Philippe
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
Virus-free.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Le jeu. 25 févr. 2021 à 23:43, C Hamilton <[email protected]> a
écrit :
Please update to KML Tools 3.1.6 and let me know if this has been fixed or
not. You wont get this error again, but you might get some message.
—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
<#8 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ASZ7U6HZE4KPPRDYFZWKPLTTA2Y7TANCNFSM4XOQ5NPQ>
.
QGIS version: 3.10.14-A Coruña
QGIS code revision: 8374282d2a
Qt version: 5.11.2
GDAL version: 3.1.4
GEOS version: 3.8.1-CAPI-1.13.3
PROJ version: Rel. 6.3.2, May 1st, 2020
Processing algorithm…
Algorithm 'Export KMZ' starting…
Input parameters:
{ 'AltitudeAddend' : 0, 'AltitudeField' : None, 'AltitudeInterpretation' : 1, 'AltitudeMode' : 0, 'AltitudeModeField' : None, 'DateBeginField' : None, 'DateEndField' : None, 'DateStampField' : None, 'DateTimeBeginField' : None, 'DateTimeEndField' : None, 'DateTimeStampField' : None, 'DescriptionField' : ['Survey','Plot ID','Surf_Acres','NOC','Site Name','Len','Surf_m','Site_Name','Nb_SiteName','NB_Study','NB_ArchaeoSite','NB_Artefacts','NB_Ecosite'], 'ExportStyle' : True, 'InputLayer' : QgsProcessingFeatureSourceDefinition('_WS_Plots_U_0a8274f5_bd2b_46ea_8308_26a1b06564f5', True), 'LineWidthFactor' : 2, 'NameField' : 'Plot ID', 'OutputKmz' : 'TEMPORARY_OUTPUT', 'TimeBeginField' : None, 'TimeEndField' : None, 'TimeStampField' : None, 'UseGoogleIcon' : None }
There appears to be a valid source, but not a valid layer style. Processing will continue without symbol style export.
Execution completed in 0.03 seconds
Results:
{}
Loading resulting layers
Algorithm 'Export KMZ' finished
Information from provider
Name
_WS_Plots_U
Path
C:\GIS\DATA\VECTOR\_OK\_WS_Plots_U.shp
Source
C:/GIS/DATA/VECTOR/_OK/_WS_Plots_U.shp|layername=_WS_Plots_U
Storage
ESRI Shapefile
Comment
Encoding
UTF-8
Geometry
Polygon (MultiPolygon)
CRS
EPSG:32638 - WGS 84 / UTM zone 38N - Projected
Extent
642264.7327933516353369,2729443.8937102030031383 : 658153.9219990312121809,2736007.3528792089782655
Unit
meters
Feature count
21
Identification
Identifier
Parent Identifier
Title
Type
dataset
Language
Abstract
Categories
Keywords
Extent
CRS
Spatial Extent
CRS: - Projected
X Minimum: 0
Y Minimum: 0
X Maximum: 0
Y Maximum: 0
Temporal Extent
Start:
End:
Access
Fees
Licenses
Rights
Constraints
Fields
Count
14
Field
Type
Length
Precision
Comment
Survey
String
120
0
Plot ID
String
120
0
Surf_Acres
Real
10
2
NOC
Integer
2
0
Part
Integer
2
0
Site Name
String
120
0
Len
Integer64
10
0
Surf_m
Integer64
10
0
Site_Name
0
0
Nb_SiteName
0
0
NB_Study
0
0
NB_ArchaeoSite
0
0
NB_Artefacts
0
0
NB_Ecosite
0
0
Contacts
ID
Name
Position
Organization
Role
Email
Voice
Fax
Addresses
1
Links
No links yet.
History
No history yet.
from qgis-kmltools-plugin.
hamiltoncj
commented on June 9, 2024
When you send you data file by email it is getting automatically removed so I never receive it. Please put it on a network drive and just send the link or email it to [email protected] as long as it is not larger than 10 Mb. I definitely want to try and figure out what is going wrong with this. It is a very strange error and I have not been able to replicate it by guessing at what might be going wrong.
from qgis-kmltools-plugin.
Related Issues (20)
- "Image path/name" field is not visible HOT 6
- Legend symbology reverted/not working with latest version HOT 2
- Add `Extend sides to ground` option to KMZ Export for Google Earth HOT 3
- New option sugestion HOT 8
- Incorrect symbol encoding HOT 4
- Line feed character export HOT 9
- Android Google Earth crashes HOT 10
- KMLTools exportkmz in PyQGIS crashes the QGIS application HOT 6
- Export Alias and hide description field HOT 1
- png-files overwritten and in wrong place? HOT 6
- Symbology is not exported correctly when categorized in QGIS HOT 4
- Language issues, when installing it from the plugin menu and from zip file , its always in korean. HOT 1
- Importing Kmz file with embedded images HOT 2
- Import html embedded information HOT 5
- Export of Polygons does not work properly HOT 4
- Error range object message - graduated symbology HOT 5
- Error code 1 HOT 5
- AttributeError: 'QgsGeometryGeneratorSymbolLayer' object has no attribute 'strokeStyle' HOT 5
- [Feature Request] Implement "FolderPath" Feature HOT 1
- Error exporting polygon layer: no attribute 'strokeStyle' HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from qgis-kmltools-plugin.