A simple beam combiner doesn't have to be costly. It might significantly speed up the

Here's an example: <a href="http://www.lightobject.com/25mm-laser-beam-combiner-P7

feature request: integrate beam combiner about lasersaur HOT 2 OPEN

nortd commented on August 11, 2024

feature request: integrate beam combiner

from lasersaur.

Comments (2)

markvdb commented on August 11, 2024

Here's an example:
http://www.lightobject.com/25mm-laser-beam-combiner-P766.aspx
http://www.lightobject.com/Pro-25mm-beam-combiner-mount-with-laser-pointer-P872.aspx

from lasersaur.

allartburns commented on August 11, 2024

And here's some installation instructions for a commercial model that
cleared up my confusion:

https://fslaser.com/index.php/aitdownloadablefiles/download/aitfile/aitfile_id/5/

I thought the red laser was being mounted parallel to the cutting laser
when it's actually at 90 degrees. We still have to adjust the first
mirror against the cutting laser, but then we can adjust the rest of the
assembly through the red laser.

It might not be worth the expense for everyone, but if we're talking
billed hours of time, $100-$200 might make sense for some of us. If you
can replace and realign the mirrors in play or adjust the cutting head
using a red laser, that's very convenient.

J. Eric Townsend, IDSA
design http://www.allartburns.org
hacking http://www.flatline.net
consulting http://www.functionalprototype.com

from lasersaur.

Recommend Projects