Mobile-friendly UI about octoprint HOT 32 CLOSED

I could see dropping the realtime temp graph (or making it optional) to condense things, especially on mobile. It's neat and helpful when things are funky but generally speaking it seems like a lot of traffic and screen for something I'm hoping my electronics is handling on its own.

from octoprint.

Crap, i did not intend to push that button - i'm still new to github.
Btw, can i set a label for the issue myself or does the maintainer have to do that?

from octoprint.

Yeah I'm surprised that button doesn't have confirmation (although I guess it's reversible so...?).

I think only the repo owner can set the tags, at least that's how it appears (I can tag in my own repos but not this one).

from octoprint.

agreed, i cooked up some layouts in Paint, i think more tabs

if possible, to keep the funky graph, all the info text could be inside the graph?, wouldnt matter to the graph i think

from octoprint.

A mobile friendly single-column layout would be a godsend!

There may be too many tabs for a wide tab-bar at the top like that, here are- a couple of alternatives: switch using a drop-down chooser; or just make the current tab title prominent and allow swiping left and right to switch between them; or have a separate tab chooser view and from within a tab either swipe left or have a "menu" button return you to the tab chooser page.

from octoprint.

If I'm not entirely mistaken, @daprice is already working on something.

from octoprint.

Yep, working on using Bootstrap's responsive features to make it condense into a single column on smaller screens. https://github.com/daprice/OctoPrint/tree/responsive

Not totally sure what I'm going to do about the tabs yet. Currently they just wrap to the next line; they work, but don't look good. I may just switch them to Bootstrap's "pill" style when they don't fit on one line.

from octoprint.

Ok, I have my responsive layout branch at a usable state for the most part. I'm using it with my iPhone and it's a huge improvement over having to zoom in on the main layout. It might be good if people could also test on Android or other devices, although I'm not aware of anything that could cause problems there. @foosel, let me know if you think it's ready for a pull request.

Areas that could still be improved (of course, I would welcome any ideas or implementations):

• the action controls on the gcode file listing are clunky on a touchscreen and (at least on iOS) currently take two taps: the first opens the popover and the second actually activates the control. This is partially due to some limitations of Bootstrap's popovers. Also, the action controls are rather small to use on a touchscreen; fixing both of these problems at once might require redesigning those controls.
• the Gcode viewer currently does not scale to fit the screen; when you open the Gcode viewer tab you can still zoom/scroll to see the whole thing. This may require some changes to the gcode viewer to be able to dynamically handle the canvas element changing size. I didn't want to make potentially major changes to it right now because of #35.
• I haven't tested how the responsive layout affects the timelapse viewer since I don't have a webcam set up with octoprint, so the timelapse stuff may or may not look good on mobile.
• the connection, state, and files accordion sections take up quite a bit of vertical space on the single-column mobile layout. It might be a good idea to minimize some of them by default on small screens and/or save their state to localStorage so they stay minimized across page loads.

from octoprint.

Just chiming in to say that I haven't yet come around to taking a look at this due to this bloody flu I've managed to catch myself. While I'm at least able again to use a computer and do some minor stuff, it might still take a while until I'll manage to properly review your branch. Sorry for the hangup and thanks for your patience.

from octoprint.

I gave this a quick try and it looks very promising. Currently on the mobile it is essentially one tall single column - it'd be nice if there was a quick way to jump between the sections. Also, when viewing on a regular web browser, the spanner function in the "Files" section isn't working for me.

from octoprint.

Another option would be for OctoPrint to expose a small API. As an iOS developer I'd rather build a native app instead of loading a condensed version of OctoPrint in a webview.
For a simple status app I would be happy to know about the printing progress, temperature and maybe have a few controlls in case something goes awry.

@foosel what do you think?

from octoprint.

@nicolinux I've actually thought about exposing the API that is currently in use for the frontend. OctoPrint recently got an API Key setting and a couple of methods that already use this for authorizing access, I'm just still undecided on whether to establish a secondary API next to the one used for AJAX right now (that would have the advantage to allow me quicker extension/changes in case of new UI features, without having to take care of backwards compatibility) or just document the existing one and just enhance this with some additional resources that go beyond what the UI does right now (e.g. the currently available upload/select/load API), that would have the advantage of me eating my own dogfood ;) and not having to do everything twice.

Decisions, decisions, ...

from octoprint.

Hm, tough choice. I'd favor the one API solution. On the up-side it will remind you to keep things simple and not add too many features :)

from octoprint.

I am currently working on a web app which does just this, is not an ios
app, but i been thinking about writing one if we have some interest.

Ill post the code soon

On Thursday, July 4, 2013, Sorin Stefan Nicolin wrote:

Another option would be for OctoPrint to expose a small API. As an iOS
developer I'd rather build a native app instead of loading a condensed
version of OctoPrint in a webview.
For a simple status app I would be happy to know about the printing
progress, temperature and maybe have a few controlls in case something goes
awry.

@foosel https://github.com/foosel what do you think?

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/12#issuecomment-20483523
.

"Be like water making its way through cracks. Do not be assertive, but
adjust to the object, and you shall find a way around or through it. If
nothing within you stays rigid, outward things will disclose themselves.

Empty your mind, be formless. Shapeless, like water. If you put water into
a cup, it becomes the cup. You put water into a bottle and it becomes the
bottle. You put it in a teapot, it becomes the teapot. Now, water can flow
or it can crash. Be water, my friend."

• Bruce Lee

from octoprint.

Just leaving my two-cents, I love that I can start and view prints through my mobile browser. This absolutely rocks! A feature I would like to see, and I think this is more iOS than OctoPrint, is to select a gcode file from dropbox to upload. Currently, when this button is clicked on an iPhone browser, the only option is to upload from the camera roll.

from octoprint.

@daprice: I haven't seen your solution yet [UPDATE: i have checked it, i like the 'responsive'], but peter told me today about the responsive branche... I was also doing some layout tests/sketches which should be better for mobile devices. I think also that there is a difference between 'operating' and 'monitoring' the 3D printer. For operation Octoprint works good, i think for monitoring there is too much information you don't -really- need.
Since I use ultimakers, i am very used to the controller on the machine. I was involved with the very first prototypes of the controller and although the menu structure is not the best [it almost didn't change since my first sketches] it would be really nice to have more or less the same setup in the mobile version.

• 'main' screen with main info: temp / speed?! / percentage[and or time left or something with time] / file name
• when not printing: prepare with: preheat / cool down / home / move axis / disable steppers / ...
• when printing: tune with: speed / temp / flow / fan speed
• card menu / files
  and maybe some more options like webcam / connect / terminal et cetera more to the bottom

I did make some sketches once 5 months ago with the jquery mobiles stuff. For most things it would be nice to use sliders AND an input field. Unfortunately i cannot get the sliders [http://www.eyecon.ro/bootstrap-slider/] up and running [i am product designer, not a developer] otherwise i could have shared some thing already somehow. Furthermore i changed everything to accordion areas to show everything below each other.

In the title of the 'main' accordion changed the original title to 'filename' - 'temp' - '%' since that are maybe the most important things you want to know.

please let me know what you think...!

cheers\joris

from octoprint.

I think someone needs to make a mockup of the whole interface, describing how interfaces should look hardly ever works out. Tip; if you you're not fluent in Photoshop, Illustrator etc, try Excel or even paper.

from octoprint.

Another problem I have running on mobile, is it uses lots of cpu and battery. I am not sure why but at least on firefox, it seems to keep updating in the background, and unless I close tab, kills my battery.

from octoprint.

I may start working on an iOS version. Would anybody be interested?

from octoprint.

Hi,

I am interested but sadly I don't have that much time for it. But maybe I can help out.

from octoprint.

My 2 cents here, for mobile I don't need the full robust UI, I really want it mainly for checking status from phone remotely but more likely I want to use this as a diagnostics tool/remote control when working at the printer.

To explain. When I'm physically standing in front of the printer I want a way to easily move the print head around, extrude filament, home, calibrate and pause/cancel a print. So I really just need big simple buttons, on my touch screen device, kind of like a TV remote control

I can see from others comments we're on the same lines here, I'm considering just writing my own page with big dumb buttons and a small status window by use of API calls. However can I actually move the head, start/stop etc using API? AKA passthrough gcode via API.

from octoprint.

I see there's a REST API for the print server now, and I was thinking it'd be a nice to have a minimal touch-screen interface for one of those 800x480 touch screens for Raspi going around (Like this one I just ordered). I doubt I'll do my slicing on the raspberry pi anyway, so all it's really doing is receiving files and printing them. All I really want is basic printer control, file selection, print starting, and an emergency stop.

Then I thought maybe this would look good with a Star Trek themed interface. Here's my first mockup of a UI.

I already know I'll want to fit more UI in there. Maybe the busy style patch in the top mid could switch between views, or maybe selecting a file hides the file selector view to make space for extrusion and speed control.

from octoprint.

Hey guys.
I'd like a safe area with just the data, graphs, image feeds, timelapse, etc all read only set apart from the high level end print, turn off lights, pause print, change filament, etc all normal commands set apart from advanced features like turn off fans, turn off motors, move build plate down or up, etc all commands which would break a print if things were going just fine.

That way I can open the app and not worry about my daughter coming over climbing up and accidently hitting the turn off motors button.

I can help I guess too. I can do the iOS app if there is an sdk example like others have mentioned.

Thoughts?

from octoprint.

@seanreynoldscs https://github.com/quillford/OctoControl-iOS

from octoprint.

I've also just started work on a web app as an OctoPrint front end. https://github.com/quillford/OctoControl

from octoprint.

If you've come here looking for a mobile web UI, you might want to try the TouchUI plugin from @BillyBlaze http://plugins.octoprint.org/plugins/touchui/

from octoprint.

Awesome, nice work!

• Dan

On Jan 23, 2016, at 10:54 AM, Mark Walker [email protected] wrote:

If you've come here looking for a mobile web UI, you might want to try the TouchUI plugin from @BillyBlaze http://plugins.octoprint.org/plugins/touchui/

—
Reply to this email directly or view it on GitHub.

from octoprint.

Ya thats pretty great. I'm excited to check it out.

from octoprint.

Also I would love an LCARS UI for this!!!. I have a spare 7" touch screen that I could connect to the pi and totally would if it was LCARS. Let me know if you proceed with this.

from octoprint.

Oh I will. First I'll have to get my own touch screen..

• Dan

On Jan 24, 2016, at 9:56 AM, Richard Bettridge [email protected] wrote:

Also I would love an LCARS UI for this!!!. I have a spare 7" touch screen that I could connect to the pi and totally would if it was LCARS. Let me know if you proceed with this.

—
Reply to this email directly or view it on GitHub.

from octoprint.

With the TouchUI plugin there's definitely a solution for that now, so I'm closing this.

Big kudos to @BillyBlaze!

from octoprint.

If anyone needs a different iOS optimised UI ... https://github.com/MoonshineSG/OctoPrint-Mobile

from octoprint.