Comments (26)
@svdgraaf it is a great way to keep track of memory
Here is my findings:
Ive cleaned up the code a little bit (commited it already*) and changed the example (see below).
Now it seems that memory usage is almost ok, althought we need to test and investigate a little more. getCurrentTime
is ok as well
Between the first and second connection, we lose 316 bytes (maybe the first subscribe? need to investigate it). After this, the memory seems to float but coming back eventually to the same level that was recorded in the second connection. When we got an error trying to connect to mqtt server, we lose 168 bytes as well.
program execution... free heap space between (parentheses)
connected
51191 - conn: 1 - (27744)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
362290 - conn: 2 - (27408)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
672864 - conn: 3 - (27408)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
984979 - conn: 4 - (27408)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
1298342 - conn: 5 - (13176)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
1611359 - conn: 6 - (13176)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
1922638 - conn: 7 - (27408)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
2233730 - conn: 8 - (27408)
websocket layer connected / MQTT connecting /
error connection to MQTT server2
2241845 - conn: 9 - (13176)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
2551782 - conn: 10 - (27240)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
2862456 - conn: 11 - (27240)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
and here is my new example code (still didnt commit it*, I need to test more):
- note that I've used 6000 bytes as circular buffer between WS layer and MQTT layer and 2056 bytes as max mqtt message lenght... these are far more than necessary, but help me to accelerate the soft reset caused by the memory leak
- I transformed the mqtt client as a pointer to test its destroyer. I noticed that when mqtt connection got an error about 10000 bytes was lost, so I hope destroying it every connection helps us to avoid this. (interesting that after switching to pointer, we still lost 168 bytes when MQTT server could not connect)
* I probably should make a branch to avoid been commiting all the time. Sorry, I'am used to CVS, SVN, but git is still new to me. I will try to learn all git stuff in the near future ;-)
#include <Arduino.h>
#include <Stream.h>
#include <ESP8266WiFi.h>
#include <ESP8266WiFiMulti.h>
//AWS
#include "sha256.h"
#include "Utils.h"
#include "AWSClient2.h"
//WEBSockets
#include <Hash.h>
#include <WebSocketsClient.h>
//MQTT PAHO
#include <SPI.h>
#include <IPStack.h>
#include <Countdown.h>
#include <MQTTClient.h>
//AWS MQTT Websocket
#include "Client.h"
#include "AWSWebSocketClient.h"
#include "CircularByteBuffer.h"
//#define DEBUG_ESP_CORE
#define MQTT_DEBUG
//AWS IOT config, change these:
char wifi_ssid[] = "ssid";
char wifi_password[] = "pass";
char aws_endpoint[] = "endpoit.iot.us-west-2.amazonaws.com";
char aws_key[] = "AWSKEY";
char aws_secret[] = "AWSSECRET";
char aws_region[] = "us-west-2";
const char* aws_topic = "$aws/things/owner-group-type-id/shadow/update";
int port = 443;
//MQTT config
const int maxMQTTpackageSize = 2056;
const int maxMQTTMessageHandlers = 1;
ESP8266WiFiMulti WiFiMulti;
AWSWebSocketClient awsWSclient(6000);
IPStack ipstack(awsWSclient);
MQTT::Client<IPStack, Countdown, maxMQTTpackageSize, maxMQTTMessageHandlers> *client = NULL;
//# of connections
long connection = 0;
//generate random mqtt clientID
char* generateClientID () {
char* cID = new char[23]();
for (int i=0; i<22; i+=1)
cID[i]=(char)random(1, 256);
return cID;
}
//count messages arrived
int arrivedcount = 0;
//callback to handle mqtt messages
void messageArrived(MQTT::MessageData& md)
{
MQTT::Message &message = md.message;
Serial.print("Message ");
Serial.print(++arrivedcount);
Serial.print(" arrived: qos ");
Serial.print(message.qos);
Serial.print(", retained ");
Serial.print(message.retained);
Serial.print(", dup ");
Serial.print(message.dup);
Serial.print(", packetid ");
Serial.println(message.id);
Serial.print("Payload ");
char* msg = new char[message.payloadlen+1]();
memcpy (msg,message.payload,message.payloadlen);
Serial.println(msg);
delete msg;
}
//connects to websocket layer and mqtt layer
bool connect () {
if (client == NULL) {
client = new MQTT::Client<IPStack, Countdown, maxMQTTpackageSize, maxMQTTMessageHandlers>(ipstack);
} else {
if (client->isConnected ()) {
client->disconnect ();
}
delete client;
client = new MQTT::Client<IPStack, Countdown, maxMQTTpackageSize, maxMQTTMessageHandlers>(ipstack);
}
//delay is not necessary... it just help us to get a "trustful" heap space value
delay (1000);
Serial.print (millis ());
Serial.print (" - conn: ");
Serial.print (++connection);
Serial.print (" - (");
Serial.print (ESP.getFreeHeap ());
Serial.println (")");
int rc = ipstack.connect(aws_endpoint, port);
if (rc != 1)
{
Serial.println("error connection to the websocket server");
return false;
} else {
Serial.println("websocket layer connected");
}
Serial.println("MQTT connecting");
MQTTPacket_connectData data = MQTTPacket_connectData_initializer;
data.MQTTVersion = 3;
char* clientID = generateClientID ();
data.clientID.cstring = clientID;
rc = client->connect(data);
delete[] clientID;
if (rc != 0)
{
Serial.print("error connection to MQTT server");
Serial.println(rc);
return false;
}
Serial.println("MQTT connected");
return true;
}
//subscribe to a mqtt topic
void subscribe () {
//subscript to a topic
int rc = client->subscribe(aws_topic, MQTT::QOS0, messageArrived);
if (rc != 0) {
Serial.print("rc from MQTT subscribe is ");
Serial.println(rc);
return;
}
Serial.println("MQTT subscribed");
}
//send a message to a mqtt topic
void sendmessage () {
//send a message
MQTT::Message message;
char buf[100];
strcpy(buf, "{\"state\":{\"reported\":{\"on\": false}, \"desired\":{\"on\": false}}}");
message.qos = MQTT::QOS0;
message.retained = false;
message.dup = false;
message.payload = (void*)buf;
message.payloadlen = strlen(buf)+1;
int rc = client->publish(aws_topic, message);
}
void setup() {
Serial.begin (115200);
delay (2000);
Serial.setDebugOutput(1);
//fill with ssid and wifi password
WiFiMulti.addAP(wifi_ssid, wifi_password);
Serial.println ("connecting to wifi");
while(WiFiMulti.run() != WL_CONNECTED) {
delay(100);
Serial.print (".");
}
Serial.println ("\nconnected");
//fill AWS parameters
awsWSclient.setAWSRegion(aws_region);
awsWSclient.setAWSDomain(aws_endpoint);
awsWSclient.setAWSKeyID(aws_key);
awsWSclient.setAWSSecretKey(aws_secret);
awsWSclient.setUseSSL(true);
if (connect ()){
subscribe ();
//sendmessage ();
}
}
void loop() {
//keep the mqtt up and running
if (awsWSclient.connected ()) {
client->yield();
} else {
//handle reconnection
if (connect ()){
subscribe ();
}
}
}
from aws-mqtt-websockets.
Hmmm, after some more testing, it seems to be that is something weird going on with the length of the string. If publish {"barrr"}
, it doesn't seem to be receiving anything, but after a while, the esp will reboot (probably buffer overflow?). If I publish a slightly shorter string {"barr"}
, it just works.
I'll see if I can find why.
from aws-mqtt-websockets.
I can confirm that it works both ways (receiving and publishing), longer messages are not processed...
from aws-mqtt-websockets.
Uuuuuugh, got it! Took me a while! :D
Topic needs to be a const char*
, it's probably used a lot, so not passing it by reference will eat up quite some memory probably ;)
Awesome, it works! :D woohoo!
from aws-mqtt-websockets.
Hmmm, there still is an issue with either long messages, or a long topic
name. If a have a long Topic name, eg: $aws/things/your-device/shadow/update
, and a long message: {"reported":{"foo": "bar"}, desired:{}}
. Nothing will be delivered.
If I have a short message and a long topic, it works. A short topic and a long message wil work too. I haven't found where the bug is yet, or what the maximum amount of characters is.
from aws-mqtt-websockets.
Ha! Got it :)
It was a bit of a search, but the Paho client is by default limited to max packages of X size. So ofcourse, this would result message failures when the topic + message gets a bit longer.
Changing:
MQTT::Client<IPStack, Countdown, 50, 1> client = MQTT::Client<IPStack, Countdown, 50, 1>(ipstack);
into:
MQTT::Client<IPStack, Countdown, 255, 1> client = MQTT::Client<IPStack, Countdown, 255, 1>(ipstack);
Fixed the issue, the 255 is the max length of the MQTT packages (the longer, the memory it will use as well, ofcourse). This is also valid for the incoming package length (so for receiving messages from the outside). Pretty important :)
from aws-mqtt-websockets.
@svdgraaf I've notice this testing today. I've implemented the auto-reconnection feature and fix the need of that wait for connection workaround. Of course, it would be very nice to stress test these features ;-)
next target.... remove the need for bytebuffer
from aws-mqtt-websockets.
Awesome, I'll run some more testing tomorrow :)
Cheers!
Sander
On 28 mrt. 2016 20:58 +0200, [email protected], wrote:
@svdgraaf(https://github.com/svdgraaf)I've notice this testing today. I've implemented the auto-reconnection feature and fix the need of that wait for connection workaround. Of course, it would be very nice to stress test these features ;-)
next target.... remove the need for bytebuffer
—
You are receiving this because you were mentioned.
Reply to this email directly orview it on GitHub(#2 (comment))
from aws-mqtt-websockets.
hi @svdgraaf, let me ask you something?
are you using the stage or stable version of arduino esp8266 code? 2.1.0 or 2.1.0-rc2?
I am investigating the memory leak after many reconnections. Tried the stable version and nothing worked, neither the first connection. O.o
from aws-mqtt-websockets.
I'm running a git checkout, it's revision 633e48f3aec5f1c3c11d4498fc90d378d49e6e9f
. I haven't had these issues yet (on a Adafruit huzzah board).
from aws-mqtt-websockets.
I've got the latest version from git and I'm still having problems
this simple code shows that heapspace get smaller after each reconnection
const char* host = "google.com";
WiFiClient c;
for (int i =0; i< 100; i+=1) {
Serial.print (i);
Serial.print ("-");
Serial.println (ESP.getFreeHeap());
if (c.connect (host,80)) {
delay (100);
c.flush ();
c.stop ();
delay (100);
} else {
Serial.println ("connection refused");
}
}
this code is using esp8266 core :-( my board is a generic one but It seems to be a software issue.
from aws-mqtt-websockets.
I tested that code and I had the same outcome, the heap keeps shrinking after every loop. I did a quick search and it looks like that you are not the first one to notice this, here is a blog post about that (see "The Unexpected Discovery" paragraph): http://internetofhomethings.com/homethings/?p=1232
And a couple issues I found showing more details and possible solutions: esp8266/Arduino#230, esp8266/Arduino#1070
Edit: I did some more testing, here is the output of 200 iterations with a 3 minutes delay in the middle. The heap does recover and this confirms that the issue is caused only because "closed connections go into TIME_WAIT state where they must be kept by the TCP stack for 2xMSL interval".
0-46128
1-45904
2-45712
[...]
97-27472
98-27280
99-27088
Sleep for 3 minutes
100-46128
101-45904
102-45712
[...]
197-27472
198-27280
199-27088
from aws-mqtt-websockets.
thank you @daniele-salvagni, this mod fixed the issue esp8266/Arduino#230 (comment)
strange that it is not in the master branch yet.
from aws-mqtt-websockets.
I can concur that I'm having the same issue, I just did a recompile with the tcp_abort(_pcb);
fix, let's see how long it will run.
btw: I had issues with connecting to the mqtt from the latest checkout on the master
esp8266 branch, I'm back to my above mentioned hash now, and everything works like a charm so far.
from aws-mqtt-websockets.
I'm still investigating before close issue #5
tcp_abort(_pcb)
improved, but I am still losing memory. I am looking at the moment in the getCurrentTime
function. Maybe it is a good idea to reuse the WifiClient
object. It seems that we lose some memory there. The problem is find free time to work on this :-( I will keep you informed about my findings
from aws-mqtt-websockets.
I'm now posting the heap size in my latest build to AWS as well, and plotting it into Kibana:
The line is pretty lineair, so that's good 😉 I will see if I can find the time to debug the getCurrentTime()
method. I saw some other library which used a ntp server for that. Might be a bit overkill though.
from aws-mqtt-websockets.
after 28 hours, the esp8266 crashed again... but it seems not be caused by memory leak
I will try to investigate this exception (29) but the memory issue seems to be under control
have any of you guys already had problems with exception 29?
100187627 - conn: 372 - (27240)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
100498617 - conn: 373 - (27240)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
100809295 - conn: 374 - (27240)
websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed
Exception (29):
epc1=0x4000e1b2 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
*note that memory usage (27240) from connection 374 is the same from the connection from last post
from aws-mqtt-websockets.
Nice! I haven't been able to look at your new code yet, but sounds very promising! :)
On 14 apr. 2016 14:16 +0200, [email protected], wrote:
after 28 hours, the esp8266 crashed again... but it seems not be caused by memory leak
I will try to investigate this exception (29) but the memory issue seems to be under control
have any of you guys had already problems with exception 29?
100187627 - conn: 372 - (27240) websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed 100498617 - conn: 373 - (27240) websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed 100809295 - conn: 374 - (27240) websocket layer connected / MQTT connecting / MQTT connected / MQTT subscribed Exception (29): epc1=0x4000e1b2 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000000 depc=0x00000000
*note that memory usage (27240) from connection 374 is the same from the connection from last post
—
You are receiving this because you were mentioned.
Reply to this email directly orview it on GitHub(#2 (comment))
from aws-mqtt-websockets.
After some looking around, the 29 exception does point to an invalid reference somewhere (trying to overwrite a value in virtual memory which is prohibited). Can you perhaps create push a branch with your current code? I can hook up a debugger, and see where the issue is.
from aws-mqtt-websockets.
I figured my esp must have crashed by now, but hadn't checked the actual output. I just did, and it's still running (~29 hours now), the heap size is stable for the last few hours around 10k. It's posting to a mqtt channel every 10 seconds. I'm running 633e48f3aec5f1c3c11d4498fc90d378d49e6e9f
of the esp8266 repo, with the manual 'fix' for the tcp_abort()
. Let's see how long it will last...
from aws-mqtt-websockets.
Still going strong after 49 hours... Heap size still the same
from aws-mqtt-websockets.
@svdgraaf the code at github is my most up to date code... I just didn't upload the example code yet, but I've posted it above. it seems that the memory issue was fixed.
from aws-mqtt-websockets.
I found the sample code in the above comment to be tremendously helpful. The Sample I'd been working off previously was failing frequently on connection. This sample worked great :) I am connected and successfully receiving messages.
from aws-mqtt-websockets.
It seems I spoke too soon - I'm still running into issues getting the websocket connection to work:
connected
11904 - conn: 1 - (26504)
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
pm open,type:2 0
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
error connection to the websocket server
19491 - conn: 2 - (11360)
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
error connection to the websocket server
26987 - conn: 3 - (11360)
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
[AWSc] Disconnected!
please start sntp first !
error connection to the websocket server
34480 - conn: 4 - (11360)
It just keeps on rolling like that. Any suggestions on what to do to make the websocket connect more reliable? I got it working once, but now I have no idea what make that work.
from aws-mqtt-websockets.
Hi,
Till yesterday, everything was working fine for me. I connected my ESP8266 development board to AWS IoT. Today morning, I connected it again without making any change and I started getting following error:
please start sntp first !
error connection to the websocket server
Appreciate your help on this.
from aws-mqtt-websockets.
Regarding the SNTP issue:
Add the following line to the Setup section,
configTime(3 * 3600, 0, "pool.ntp.org", "time.nist.gov");
from aws-mqtt-websockets.
Related Issues (20)
- undefined reference to 'gmtime_r' in Stream.h and AWSWebSocketClient.h HOT 1
- Not seeing aws subscribed messages
- Fatal exception 3(LoadStoreErrorCause) with NodeMCU
- How can I publish a command to esp8266 from AWS? HOT 1
- pubsubclient sample cannot compile cannot declare variable 'awsWSclient' to be of abstract type 'AWSWebSocketClient' HOT 11
- Incompatibility with TimeLib 1.5
- While Using PubSub Example reconnections are still Happening every 5 secs
- Putting a private key on the device represents a HUGE security flaw HOT 4
- Eratic connection HOT 1
- Callback function doesn't execute while sub on get/accepted shadow HOT 1
- Using SessionToken to connect to AWS IoT Core
- ESP8266 AWS web socket connection fails because of BearSSL HOT 3
- Connection failed because of inproper initialization HOT 4
- How to connect by certificates instead of aws_key and aws_secret HOT 5
- Exception 3: LoadStoreError: Processor internal physical address or data error during load or store HOT 2
- 403 forbidden response from aws while handshake
- Exception 28 error HOT 2
- Unable to compile HOT 2
- Max payload size is 100 char
- Compiling error: no match for 'operator+=' (operand types are 'String' and 'char [(<anonymous> + 1)]') HOT 2
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from aws-mqtt-websockets.