Comments (13)
hemant5400z
commented on June 13, 2024
I Also tried the Postscript driver and the first job goes ok.
But on the next job I get "Unable to write print data: Broken pipe"
after second page.
from dockerfiles.
hemant5400z
commented on June 13, 2024
lpstat shows device
and scheduler is also started
from dockerfiles.
olbat
commented on June 13, 2024
Hi @hemant5400z,
Maybe you can share your expertise on htis issue?
I'm going to be honest with you, I don't have much π
It looks like a CUPS-related issue so I'd suggest you to reach out to the team that maintains the Debian package, the maintainers of the upstream project or give a shot to a more generic support channel (Linux IRC chatroom, Debian forum, ...) to troubleshoot. It could also be related to the driver, etc.
Good luck with your troubleshooting & don't hesitate to share any findings!
from dockerfiles.
hemant5400z
commented on June 13, 2024
Hi,
I thought it was indeed but i installed the same version manually (no docker) and i donβt have any issues and can print without any problems.
The problem occurs when using synology and docker.
I tried lpd and socket both give the same problem.
So looks like something is missing when passing print jobs through synology and docker.
Hemant
Verstuurd vanaf mijn iPhone
Op 10 feb. 2021 om 17:56 heeft Luc Sarzyniec <[email protected]> het volgende geschreven:
ο»Ώ
Hi @hemant5400z<https://github.com/hemant5400z>,
Maybe you can share your expertise on htis issue?
I'm going to be honest with you, I don't have much π
It looks like a CUPS-related issue so I'd suggest you to reach out to the team<https://tracker.debian.org/pkg/cups> that maintains the Debian package, the maintainers<https://github.com/OpenPrinting/cups/#getting-support-and-other-resources> of the upstream project or give a shot to a more generic support channel (Linux IRC chatroom, Debian forum, ...) to troubleshoot.
Good luck with your troubleshooting & don't hesitate to share any findings!
β
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#48 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEA6CKQ46AEY4RFZRYPNOY3S6K3DTANCNFSM4XMWTWJA>.
from dockerfiles.
olbat
commented on June 13, 2024
Are you sure that the version & the runtime environment are exactly the same? (same version of Debian, same configuration, same packages installed, etc.).
from dockerfiles.
olbat
commented on June 13, 2024
Could the broken pipe issue be related to some firewall / Synology configuration issue?
from dockerfiles.
hemant5400z
commented on June 13, 2024
Firewall not sure why wouldnit print 2 pages.
I allowed 5353 and 631 to tje firewall for mu subnet and to be sure also for the bridged 172.zxx.
But it gave the same error.
You are right runtime is not 100 % as mij virtual machine is based on ubuntu.
Only cups version is the same.
Verstuurd vanaf mijn iPhone
Op 10 feb. 2021 om 19:18 heeft Luc Sarzyniec <[email protected]> het volgende geschreven:
ο»Ώ
Could the broken pipe issue be related to some firewall / Synology configuration issue?
β
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#48 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEA6CKRA3SVB6JD7XQBESDTS6LEWBANCNFSM4XMWTWJA>.
from dockerfiles.
olbat
commented on June 13, 2024
Could you try to install the same version of the drivers than the ones that managed to get working?
from dockerfiles.
hemant5400z
commented on June 13, 2024
For cups you mean?
It is version 2.3.3 with gutenprint 5.3 which i recall is the same as jn the docker.
Verstuurd vanaf mijn iPhone
Op 10 feb. 2021 om 20:44 heeft Luc Sarzyniec <[email protected]> het volgende geschreven:
ο»Ώ
Could you try to install the same version of the drivers than the ones that managed to get working?
β
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#48 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEA6CKSYT4N3AEPU4HBCTWLS6LO3RANCNFSM4XMWTWJA>.
from dockerfiles.
olbat
commented on June 13, 2024
For cups you mean?
Not really, I'm speaking about the drivers for your printer (that are used by CUPS).
from dockerfiles.
hemant5400z
commented on June 13, 2024
Hi,
I used the exact same ones as in the docker; Gutenprint 5.3.3 HP3800DN
Verzonden vanuit Mail<https://go.microsoft.com/fwlink/?LinkId=550986> voor Windows 10
Van: Luc Sarzyniec<mailto:[email protected]>
Verzonden: donderdag 11 februari 2021 18:16
Aan: olbat/dockerfiles<mailto:[email protected]>
CC: hemant5400z<mailto:[email protected]>; Mention<mailto:[email protected]>
Onderwerp: Re: [olbat/dockerfiles] Problems Runing Cups on Synology as a docker (#48)
For cups you mean?
Not really, I'm speaking about the drivers for your printer (that are used by CUPS).
β
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub<#48 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AEA6CKR5BOJ6ABHJRYLW4MTS6QGF3ANCNFSM4XMWTWJA>.
from dockerfiles.
hemant5400z
commented on June 13, 2024
Hi Luc,
I have been troubleshooting for a while and seems alls is working now on a Synology running DSM 6.2.3.
After I found that for the HP3800DN the Foomatic drivers working i ran into another issue; while the printer was issible on IOS and the test page from cups admin was sucessfull i always got the message " printer offline".
So I started the docker slightly different
expsing both 631 and 5353 and not using --host (trial on error). For some reason now it works both PCL and Postcript in color and duplex.
Now i can use the synology as a print server!
cheers,
Hemant
from dockerfiles.
olbat
commented on June 13, 2024
Great, I'm glad that you managed to find a solution! :D Well done and thanks for sharing!
from dockerfiles.
Related Issues (20)
- Unable to install Windows printer when cupd.conf is redirected to another folder HOT 1
- cupsd /in unraid6.8.2,docker with HP lap1007.have this err "Waiting for printer to become available" HOT 4
- Daily update of image? HOT 3
- Unable to print on Brother DCP-J125 HOT 1
- Lost printers after Docker image update HOT 1
- Bad Request from Kubernetes HOT 3
- Add Brother drivers HOT 4
- I can't install lsb HOT 1
- Printer not detected under 'add printer' HOT 3
- [Cupsd] Suggestion: Drivers for Kyocera printers HOT 1
- [Cupsd] Question: How to persist jobs list between container restarts HOT 3
- need to re-install and config printer after update docker HOT 1
- All below root is "Not Found" HOT 21
- Could you tag your docker image HOT 3
- Printer not detected under 'add printer' HOT 5
- Trying to run the container on Rapsberry pi, but getting this error: HOT 4
- Can't support Canon IC MF4010 HOT 1
- Add samsung unified driver to CUPS HOT 1
- HP m1212nf w/ hp-plugin HOT 4
- Image uglify in reality is uncss HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
π Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. πππ
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google β€οΈ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from dockerfiles.