Enable just using USB port for wakeup. about openelec.tv HOT 4 CLOSED

Hmm the problem of this script is on OpenELEC lirc is not compiled asa module. Thats why getting "No lirc driver loaded!"
error.

from openelec.tv.

do you have still the problem? eventlircd should only enable the USB ports for all input devices.

from openelec.tv.

Are you sure about that? Actually it's not problem on my ION system. If all USB* ports enabled not causing wakeup immediately. Btw just my remote ir connected to usb. Nothing else. Other usb ports free.
My ION2 /proc/acpi/wakeup print:

Device  S-state   Status   Sysfs node
P0P1      S4    *disabled  pci:0000:00:1e.0
P0P4      S4    *disabled  pci:0000:00:1c.0
P0P5      S4    *disabled  pci:0000:00:1c.1
P0P6      S4    *disabled  pci:0000:00:1c.2
P0P7      S4    *disabled  
P0P8      S4    *disabled  
P0P9      S4    *disabled  
USB0      S3    *enabled   pci:0000:00:1d.0
USB1      S3    *enabled   pci:0000:00:1d.1
USB2      S3    *enabled   pci:0000:00:1d.2
USB3      S3    *enabled   pci:0000:00:1d.3
EUSB      S3    *enabled   pci:0000:00:1d.7

But on my Generic system also just remote ir receiver connected but enabled all USB* cause immediate wakeup.

Note: I solve this problem on my Generic system with disable all other USB ports (except ir reciever) with autostart.sh. And also after wakeup I need extra (/etc/pm/sleep.d/) script for disable again because every wakeup enable all USB* ports.

I will test my Generic system tomorrow without this hacks and report you back.

from openelec.tv.

Same on generic system. I guess wakeup_enable (http://code.google.com/p/eventlircd/source/browse/trunk/udev/wakeup_enable.in) script enable all USB ports. Not a big deal. If you have time just check what you can do.

from openelec.tv.