Comments (14)
Yes please can you upload the SPK file? Thanks
from openhab-syno-spk.
You can convert it on your own, spk ist just a renamed tar.gzip
Within the openhab-syno-spk-3.0.0.00.tar.gz there is a openhab-syno-spk-3.0.0.000 folder with the conf, scripts, WIZARD_UIFILES subfolders etc. needed by the Package Center in it.
Exctract this folder with e.g. 7zip to some temporary folder, select the content and make a tar.gz out of the it (again with 7zip). Then just rename it to *.spk, Package Center will recognize this as a valid package.
from openhab-syno-spk.
Perfect ! It's working.
But now I hav new issue : I can't access to the interface @ 192.168.1.XXX:8080
Any idea ?
openhab.log
from openhab-syno-spk.
Oh no, even version 2.5 is not working anymore :(
from openhab-syno-spk.
Could be that 8080 is already used by some other app.
I change the port to 8180 if necessary but mainly use the 8443 port for https access.
Did you start openHAB manually or via the DSM ?
from openhab-syno-spk.
What I have done :
1° I already had version 2.5 installed on my Synology, with access thanks to port 8080
2° In order not to loose my configuration, I did not uninstall previous version, but only install the 3.0 version with .SPK file
3° Package was sucessufully installed, it starts automatically
4° I tried to access to OpenHab with IP address and port 8080 (I kept the same), but I faced an error : "connection not allowed"
After, I tried to retard package, to uninstall it, to reinstall version 2.5 (same connection issue)
I tried also to delete folders, but still the same connection issue....
from openhab-syno-spk.
Did you try 8443 which is the default port for SSL access ?
from openhab-syno-spk.
It is not working with 8443
I have the same message
from openhab-syno-spk.
Did you reset the certificate in the browser ?
After reinstallation, openhab creates a new certificate for the https access over port 8443.
If you have accepted the old, self signed certificate it will not match the new one and the browser will not access openhab
from openhab-syno-spk.
I think I need java11 by I don't konw how to install it. Can anyone help me ?
Here is the error message in the log file :
2021-03-30 14:32:05.252 [ERROR] [ternal.service.BootFeaturesInstaller] - Error installing boot features
org.apache.felix.resolver.reason.ReasonException: Unable to resolve root: missing requirement [root] osgi.identity; osgi.identity=openhab-runtime-base; type=karaf.feature; version="[3.0.1,3.0.1]"; filter:="(&(osgi.identity=openhab-runtime-base)(type=karaf.feature)(version>=3.0.1)(version<=3.0.1))" [caused by: Unable to resolve openhab-runtime-base/3.0.1: missing requirement [openhab-runtime-base/3.0.1] osgi.identity; osgi.identity=openhab-core-model-item; type=karaf.feature [caused by: Unable to resolve openhab-core-model-item/3.0.1: missing requirement [openhab-core-model-item/3.0.1] osgi.identity; osgi.identity=org.openhab.core.model.item; type=osgi.bundle; version="[3.0.1,3.0.1]"; resolution:=mandatory [caused by: Unable to resolve org.openhab.core.model.item/3.0.1: missing requirement [org.openhab.core.model.item/3.0.1] osgi.wiring.package; filter:="(&(osgi.wiring.package=org.openhab.core.common.registry)(version>=3.0.0)(!(version>=4.0.0)))" [caused by: Unable to resolve org.openhab.core/3.0.1: missing requirement [org.openhab.core/3.0.1] osgi.ee; filter:="(&(osgi.ee=JavaSE)(version=11))"]]]]
from openhab-syno-spk.
I hope there will come up a solution, I've got exactly the same problem !
from openhab-syno-spk.
Same problem here too : no SPK and I can't install because port 8080 is already in use... Please just change it :(
from openhab-syno-spk.
You can convert it on your own, spk ist just a renamed tar.gzip Within the openhab-syno-spk-3.0.0.00.tar.gz there is a openhab-syno-spk-3.0.0.000 folder with the conf, scripts, WIZARD_UIFILES subfolders etc. needed by the Package Center in it. Exctract this folder with e.g. 7zip to some temporary folder, select the content and make a tar.gz out of the it (again with 7zip). Then just rename it to *.spk, Package Center will recognize this as a valid package.
I don't understand why there is no .spk file in Releases for 3.0.0, if it is trivial to make one, can some one please just make one available on the Releases page?
Instructions here are confusing, do I need to download the .tar.gz and then take some inner folder and make another tar.gz, or do I just download .tar.gz from Releases page and rename it to .spk?
Has this really been open since March and nobody bothered to just create the SPK file and put it on the Releases page? Do you need volunteers for this task
from openhab-syno-spk.
i have the same issue, so created the spk manually as nstructions above, but i get error below
but i dont have anything tunning on my synology on port 8080 or 8443
whats wrong?
from openhab-syno-spk.
Related Issues (20)
- Error when install package HOT 7
- Enable usage of multiple network interfaces
- Local Computer Systeminfo error
- Clear cache
- 2.5.2.000 installed but won't start after upgrade from 2.4.0.002 HOT 1
- DSM 7: Clean up packaging files and make it conform with Synology guidelines HOT 19
- Installation suceeds, package service can't be started - 3.0 Snapshot HOT 5
- adding to https://synocommunity.com/packages
- openhab3 for older Synology NAS HOT 5
- Linked jdk is not arm32
- Bintray isn't available anymore HOT 5
- Move out the API URL into separate configuration file HOT 1
- What Java package on DSM7 for OpenHAB SPK?
- DSM 7 does not accept .spk
- Frustration about the openHAB installation on Synology NAS HOT 5
- 3.0 missing sdk HOT 2
- There was a problem downloading openhab-2.5.2.zip from the download link HOT 1
- There was a problem downloading openhab-.zip from the download link (3.0.0) HOT 4
- DepShield Deprecation Notice
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from openhab-syno-spk.