X96 max + turn black screen about amlogic-s9xxx-openwrt HOT 13 CLOSED

What STB? Which firmware is used? Connect the monitor, what is the picture you see?

from amlogic-s9xxx-openwrt.

Stb = x96 max +
Firmware = https://github.com/ophub/amlogic-s9xxx-openwrt/releases/download/openwrt_s9xxx_2021.03.09.1944/openwrt_s905x3_v5.4.101_2021.03.09.1933.img.gz
Connecting monitor just show black screen. Trying to reset with reset button inside av port. Nothing happen.

from amlogic-s9xxx-openwrt.

• Connect the monitor, there is no code prompt at all? Are there any code hints, please take a screenshot?
• I just tested and installed the same firmware, it can be used normally after writing.
• you can see the screenshot of my installation and the screenshot after restart

What installation command did you use? Did you enter TEST-UBOOT to install a new UBOOT that is not prompted to install by default?
Look at the prompt message on the display to tell you the solution.

from amlogic-s9xxx-openwrt.

Stuck just like that. No code showing. I just run openwrt-install no other command such as TEST-UBOOT. Sorry if I miss the step and brick my device

from amlogic-s9xxx-openwrt.

If you installed the v5.10.19.TF version, this yesterday's version forgot to make the judgment of restricting writing to EMMC(This bug has been fixed), and it cannot be started after installation (it does not affect the reinsertion of the U disk, booting from the U disk), you can download it again If there is no .TF, restart the installation on the USB flash drive.

You try to insert the 5.4.101 version of the USB hard drive and reinstall.

from amlogic-s9xxx-openwrt.

Which country are you from, I will help you find an initialization tutorial.
Can you read Chinese Or Indonesian? I have seen many tutorials written by Chinese and Indonesian people on the Internet. It would be convenient if you can read Chinese, or you can use Google Translate to help you understand.

Flippy: The maker of Amlogic s9xxx Kernel for openwrt is Chinese people. When I was reading his explanation, I saw a lot of relevant information in the Chinese community, which I can share with you.

from amlogic-s9xxx-openwrt.

I live in Malaysia and can read Indonesian. I'm using non tf image . Live boot from USB. I try to reinstall but the problem is my monitor does not show anything. Just blank screen. No error message. I'm stuck. Yesterday I buy usb male to male to flash stock firmware, open up the burning tools, but the usb not detected. Try usb 2.0 & 3.0 also stuck. I don't know how to fix the problem. Sorry to disturbing you. 🙏

from amlogic-s9xxx-openwrt.

https://zhuanlan.zhihu.com/p/293943099

This help contains the software and firmware to restore and initialize the TV system. You can read it with the help of google translation. I have used this solution when testing the firmware, it is perfectly restored to the original TV system, and then you can reinstall openwrt.

The firmware at 19:00 on March 9th, after being written to EMMC, even though it could not be booted from EMMC, after inserting the U disk, it is still possible to boot from the U disk again.

Are you sure you are using yesterday's firmware? Or an earlier date? There are several different phenomena that may require different methods to restore the system, you first try the above solution.

from amlogic-s9xxx-openwrt.

Tq my friend. I follow the guide and successfully restore stock firmware. Short the circuit do the trick. Now to confirm which firmware should I use to flash again without any problem. I run install-openwrt inside the live usb boot before. I do not run the command inside ttyd at luci. Is it the cause of the problem? I see successful flash message before restarting and the problem occurs after reboot the stb. anyway im using yesterday build 9/03/2021. now im trying to flash todays build. do i need to run TEST-UBOOT before flash?

from amlogic-s9xxx-openwrt.

Which one should I select? Yesterday build I select number 1 and after that stb brick.

Result of new flash= 1 pick number 2 form list of box, flash, reboot then brick again @black screen.
Same problem happen with someone who give the guide to unbrick. Don't know what is the main cause.

from amlogic-s9xxx-openwrt.

Yesterday build I run live usb. Check the luci page it's working. After flashing into memory then it brick

from amlogic-s9xxx-openwrt.

Download today's latest firmware:
https://github.com/ophub/amlogic-s9xxx-openwrt/releases/tag/openwrt_s9xxx_2021.03.10.0938

openwrt_s905x3_v5.4.101_2021.03.10.0926.img.gz
For your x96max+:
✅ Install command: openwrt-install
✅ Choose 1
install it

❌ Don't use TEST-UBOOT ! Don't use TEST-UBOOT ! Don't use TEST-UBOOT !
❗The mainline u-boot is not perfect yet, and the install is not prompted by default. The relatively stable BootLoader is currently installed by default.

from amlogic-s9xxx-openwrt.

I added two possible problems and recovery methods in the installation document:

https://github.com/ophub/amlogic-s9xxx-openwrt/tree/main/amlogic-s9xxx/install-program

from amlogic-s9xxx-openwrt.