How to specify the path of boost and libtool about opm-core HOT 5 CLOSED

Boost include path: /usr/include
Detected version of Boost is too old. Requested version was 1.39 (or newer).
You may need to set ... BOOST_ROOT to the location of Boost

If you have a newer version of Boost installed in say /usr/local/boost-1.53, you can specify this with a command line like:

  cmake  ../opm-core  -DCMAKE_BUILD_TYPE=Release  -DBOOST_ROOT=/usr/local/boost-1.53

-- Libtool not found!
-- Configuring incomplete, errors occurred!

This is just a warning, followed by a summary. The error is due to the out-dated Boost version, and not to libtool, although that is hard to see by the way the log is written. If you don't have libtool, the build system will simply disable the feature that uses it.

By the way, what system are you running on?

from opm-core.

It works. Thank you so much.
I am running the code on Scientific Linux.

from opm-core.

I am running the code on Scientific Linux

Could you post the contents of /etc/redhat-release? I don't think Scientific Linux is detected properly. (It won't matter for the built library, but it may help us improve diagnostics later)

from opm-core.

I am running the code on Bugoboo of westgrid. It is a Scientific Linux based. But I did not find /etc/redhat-release...

from opm-core.

It is a Scientific Linux based. But I did not find /etc/redhat-release...

Ah well, I guess it is a custom build. Anyways, as it seems to build fine, I close this case.

from opm-core.