Comments (10)
outdoorbits
commented on June 12, 2024
Most probably it's a power problem. Did you try another cardreader or a powered hub?
GoPro allows also a camera backup. But it's a bit problematic as it connects to USB only after reinserting the battery.
from little-backup-box.
an124pilot
commented on June 12, 2024
I have tried 2 different card readers and the same error occurs, Plugging a canon 7D directly in allows for a backup to occur, but no images get transferred over (it does through the whole process and says backup complete, but then says 0 out of 113 photos copied). Does the Pi not supply enough power through the usb ports to be able to use a card reader? I am using a 3A power supply to power the pi. Also tried a micro sd from a DJI mini 3 drone with no luck. same error. And same error occurs when using a powered usb hub.
from little-backup-box.
outdoorbits
commented on June 12, 2024
That's usually the problem. I would suggest to use a powered hub. Please have a look at the wiki.
from little-backup-box.
an124pilot
commented on June 12, 2024
That seems to have solved the issue.
One last question, How do I update the internal clock of the software so that it matches the right date and time?
from little-backup-box.
outdoorbits
commented on June 12, 2024
I expect this to be done automatically when connecting to the internet... I'm not sure actually. I'm in holiday now but if it doesn't sync time, please tell me. I'll fix that within next two weeks.
from little-backup-box.
an124pilot
commented on June 12, 2024
It does not seem to be updating to the correct time. It has the minutes right but not the hours. The hours are about 5 hours ahead. So I am not sure if there is somewhere to set the time zone I am in or not, but if it is updating from internet time, it is not currently doing so.
from little-backup-box.
outdoorbits
commented on June 12, 2024
Ok, it's using UTC. Because raspberry can't keep the time, it starts always at unixtime 0 and if you are offline, it will stay in past. Do you need correct time zone? I can add this.
from little-backup-box.
an124pilot
commented on June 12, 2024
A Time zone selector would be very handy.
Also a further update to the error 11 issue. The issue seems to have stemmed from trying to copy from a micro sd card from any camera (DJI drone, GoPro, cannon) to a USB flash drive or hard drive formatted in Apple file systems HFS and HFS Plus. When using a hard drive formatted in exFat, the transfer happens with no issues and no powered USB Hub is required.
Further testing on my end shows that transfers will no occur to any target drive that is formatted as Apple file systems HFS and HFS Plus and transfers only work when the source is also in Apple file systems HFS and HFS Plus.
from little-backup-box.
outdoorbits
commented on June 12, 2024
File system management and all core components are completely rewritten and I hope it will be ready for a first upload in maybe two weeks. I hope, this problem will be solved then. I hope you will test this and report.
from little-backup-box.
outdoorbits
commented on June 12, 2024
The new version is online now, in development branch. Setting time zone is included. Depending on bug reports this might replace the main branch some weeks later.
from little-backup-box.
Related Issues (20)
- Install crashes on step 6
- Development version: Create thumbnails. Task list contains already completed ones
- "Power down after idle-time" does not work HOT 30
- Wifi connection stopped after backup started HOT 9
- No read/write permission for subfolders inside the Backup folder HOT 10
- Can't back up to cloud services HOT 2
- Backup not starting [dev branch; specific Hardware ] HOT 4
- Code injection vulnerability
- Problem or Operator Failure HOT 32
- bookworm causes problems
- Installation problems fixed
- Network connection fails - wireguard broken: fixed HOT 2
- Instructions for defining source and target devices (and paths) HOT 5
- Raspberry Pi 5: GPIO functions (display and buttons) do not work HOT 6
- Mail does not work when "user" is not an e-mail address HOT 6
- Unable to login after global password set HOT 7
- Raspberry Pi Zero W - No display on I2C display (sh1106) HOT 1
- Unable to backup to Samsung T7 Touch HOT 14
- EN Translation error HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from little-backup-box.