Videojs error "The media playback was aborted due to a corruption problem..." about owncast HOT 8 OPEN

Are you using passthrough mode?

from owncast.

No, I have 4 output settings without passthrough mode.

from owncast.

Sounds like this is a new case I hadn't added to the Troubleshooting page.

Would you mind putting your stream through HLS Analyzer to see what it's reporting back?

from owncast.

@gabek thank you for your response.
HLS Analyzer has found two errors with my low quality stream settings:

1702393783: ERROR EC-2001: The ratio of measured peak bitrate (462.23 kbps) to specified bitrate (369.60 kbps) is 125.06%, which exceeds recommended 125% maximum. (29 seconds ago)

1702393783: ERROR EC-2001: The ratio of measured peak bitrate (1599.75 kbps) to specified bitrate (1249.60 kbps) is 128.02%, which exceeds recommended 125% maximum. (1 minute, 2 seconds ago)

from owncast.

That wouldn't be connected.

One thought, are you sure you have the video codec installed on your playback device? Have you tried other browsers?

from owncast.

This errors fired in some different devices randomly with different browsers and OS.

I have try some other tests in HLS Analyzer and collected this errors with similar contents:

1702901948: ERROR EC-2002: Could not download segment https://s3.eu-central-003.backblazeb2.com/ambdoc/hls/3/stream-EZHazzdIg-1572.ts (1 minute, 8 seconds ago)
1702901948: Timeout condition: (28, 'Operation timed out after 4502 milliseconds with 0 bytes received')

1702903071: ERROR EC-2002: Could not download segment https://s3.eu-central-003.backblazeb2.com/ambdoc/hls/1/stream-EZHazzdIg-1947.ts (51 seconds ago)
1702903071: Timeout condition: (28, 'Operation timed out after 4500 milliseconds with 0 bytes received')

1702910300: ERROR EC-2002: Could not download segment https://s3.eu-central-003.backblazeb2.com/ambdoc/hls/2/stream-EZHazzdIg-4358.ts (4 minutes, 33 seconds ago)
1702910300: Timeout condition: (28, 'Operation timed out after 4501 milliseconds with 0 bytes received')

I suspect it's may be because my server location in Russia and cloud storage in Europe. I will try to use another cloud storage (Yandex Object Storage), if I can configure integration.

from owncast.

I would test not using object storage at all, to make sure things are working without additional settings.

from owncast.

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. If this was a feature request that others have shown no interest in then it's likely to not get implemented due to lack of interest. If others also want to see this feature then now is the time to say something! Thank you for your contributions.

from owncast.