CMake error on OpenCV set_target_properties about superviseddescent HOT 4 CLOSED

Hi @Minotaur-CN,

Your second error on Windows definitely looks like a problem on your system. Try for example launching CMake from the VS command prompt or try the Win64 generator, or reinstalling VS. I don't think I can help with that issue.

The first one looks rather odd, I'll test with CMake 3.3. In the meantime, can you try with an older CMake? It could also be because I may have not tested it with the system-installed OpenCV. Also try just uncommenting that line, as long as you don't use the RelWithDebugInfo build, it doesn't matter.

from superviseddescent.

hi, @patrikhuber
I find the linux part bug is due to the VMWARE. I used to build the code under the windows shared folder.Now, I build the code under the linux ext3 filesystem, that can be passed.
That error happened on the opencv build process.

Thanks for u time!

from superviseddescent.

Hi @YorkLeeSIAT,

It would be great if you could open a new issue next time, this is not at all related to this issue.

As for your problem: I never tried the 32-bit generator, I always use the 64-bit one, so 32-bit is not officially supported. That said, it should work fine, and if you're on the newest version, you also shouldn't have memory issues (>=3.5 GB can naturally be an issue on 32-bit) because it shouldn't use more than 0.5-2 GBs.

If you can describe me what exactly you're doing, and what the error is, maybe I can help. Also a screenshot of the memory usage while running would be great.

from superviseddescent.

Great. Everything seems solved here, so I'll close the issue.

I strongly suspect though that there was no memory leak/corruption - probably you just ran out of memory. But it's hard to tell without knowing the error message.

from superviseddescent.