Comments (10)
It takes about 60-120 seconds for the status to go idle. If I wait this time, there is no need to restart the printer.
from pibooth.
It seem an issue with the printer, or interaction with CUPS server.
I let the issue opened a time, if someone has an idea to help you
from pibooth.
go to /etc/cups/ppd and change the line
*DefaultStpBorderless:
from False to True
from pibooth.
Hello, i installed a Canon CP1500 and used the driver from the CP1300.
An image is printed successfully.
When I print out the second photo, the terminal shows:
Printer: Canon Selphy CP1500 processing
Only when I restart the printer i can I print the next image and the message Print job .... completed appears in the terminal.
Hello BeeRii
Can you send me the procedure to configure the CP1500 with the CP1300 drivers?
Thanks
from pibooth.
Hello,
I have the same configuration as @BeeRii and I've applied the modifications in the parameters, but nothing works,
I can't print a photo until I reboot it.
Have you found a solution?
Thx
from pibooth.
I still have my problem. Can you help me?
from pibooth.
Same problem with my CP1500.
I have a border so big !! I need to delete it.
I tried every thing see here, anything works :(
Someone have found a solution.
from pibooth.
Hello all,
I just bought the CP 1500 to build a photobooth using pibooth for my weeding and had the same issue with big borders but found a solution!
Firstly, I installed gutenprint from source to have the latest 5.3.4 version that is now supporting officially the CP 1500 for CUPS (you can find some tutorials on the web to do this. I used the snapshot gutenprint-5.3.4-2023-12-14T01-00-6a3da773.tar.xz from sourceforge)
When it was updated, I added m'y printer in CUPS using the CP1500 + guten print 5.3.4 driver.
This driver seems to be working only on USB and the printer display a data error if you try to print over WiFi but by going in admistration panel of CUPS and then selecting modify printer, a new driver appear in the list : CP1500 + guntenprint 5.3.4 IPP everywhere allowing less options but working with WiFi and borderless format. I dont really know why it cannot be selected at setup time and only show the default CUPS ipp driver that is not respecting borders..
Once it is modified with the appropriate driver, go to the default options page of the printer and select the postcard.borderless format (check also in other tabs if there is a margin option to disable it, I don't remember and have not my PC next to me)
Now you can try without specifying any additional option from the pibooth config (I have just put the printer name in it, that's all!)
For me it's now working without any borders and over WiFi. I also tried with the pibooth template plugin and all is working great!
Hope it can help π
from pibooth.
Thank you for your reply, I had managed to solve the problem the way you did. But I had forgotten to post the answer.
Now I have to solve the problem of the lack of paper in the printer. When the printer runs out of paper, it is disabled in cups. You then have to restart it in CUPS, which is not possible during an event.
from pibooth.
Thank you for your reply, I had managed to solve the problem the way you did. But I had forgotten to post the answer. Now I have to solve the problem of the lack of paper in the printer. When the printer runs out of paper, it is disabled in cups. You then have to restart it in CUPS, which is not possible during an event.
Thank for your feedback,
I just tried on my side putting only one paper in the printer and cannot reproduce your issue..
If there is no paper, then the printer ask me to insert paper, if I insert it the job continue and next photos are correctly print
If I cancel the job, printer go back to idle state in CUPs and next photos also print correctly
Maybe there is a special scenario when not adding paper until a timeout is reached?
I'm on the latest raspbian so maybe this was fixed in latest packaged CUPs?
I also updated the selphy printer to the latest firmware and canon can have fixed the way changing paper is handled?
from pibooth.
Related Issues (20)
- Canβt get download server to work HOT 1
- programm freezes (oops somethign went wrong) after making a photo HOT 1
- Mirror photos HOT 3
- Raspberry Pi 4 model B : pas de lancement HOT 3
- Raspberry Pi 5 supported? HOT 1
- Can't view photos HOT 2
- Resolution with picamera v2 HOT 1
- Led start button photo HOT 2
- Raspberry Pi 4B - Pibooth does not launch / doesn't recognize Picamera v2 HOT 1
- Add possibility for arrow location on the side instead of top or bottom HOT 2
- final image took around 2 seconds after the "SMILE" image HOT 6
- Printer not working HOT 8
- Preview is working but pibooth crashes when taking the picture (EoS M100) HOT 5
- Pibooth 2.0.8 with pi5 et picamV3 - OSError: libbcm_host.so: cannot open shared object file: No such file or directory HOT 1
- please help me, wedding in 3 days... HOT 1
- Plugin: SlideShow
- Install on debian 12 HOT 3
- Pibooth not starting - video system not initialised HOT 1
- Print in 3x8
- Pibooth crashes upon launch after I got my Pi4B to recognize my Camera Module v2 HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
π Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. πππ
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google β€οΈ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from pibooth.