[Documentation] Queries Regarding Commissioning Matter Bridge From ble->thread about connectedhomeip HOT 6 OPEN

HI,
for u query ，this is my understanding，it may be wrong，still need more authoritative answer:
1: of course ，chip tool need to communicate with route， it found device in ble av，and commission in pase through ble， the comminucate with route with ipv6 packages(to send commission complete command for example).
2: matter is base on ipv6, so it supports all ethernet and wifi dn thread ,only because they all base on ipv6. matter supports thread well ,but cant say that thread is a bese for matter.

from connectedhomeip.

_

1: of course ，chip tool need to communicate with route， it found device in ble av，and commission in pase through ble， the comminucate with route with ipv6 packages(to send commission complete command for example).

_

Okay what you are trying to mention is
bridge found via BLE
commissioning in PASE via BLE
then chiptool communicates about bridge to router in ipv6 packets format and thats how border router also gets to know about a new device ?

2: matter is base on ipv6, so it supports all ethernet and wifi dn thread ,only because they all base on ipv6. matter supports thread well ,but cant say that thread is a bese for matter.

see my point
i was reading on internet as well and i found below stuff :

**Every Matter node begins its participation in a Matter network after it is commissioned (**the initial configuration of the device) by a commissioner (say a phone app that configures the device).
Matter Commissioning
During the process of commissioning, the commissioner will provide the node with the Node Operational Certificate (NOC) and the Trusted Root CA Certificate. This is when we say that the bulb has joined the Matter Fabric green (technically Matter Fabrics have a 64-bit identifier, we are just using green for convenience here).

so what exactly is this matter network that is agreed that it is having a collection of matter nodes but what is this network actually is it subnetwork in thread / wifi kind of thing?

from connectedhomeip.

matter network or matter fabric is a logic network， a matter network basically is application layer ， the real physical layer under

_

1: of course ，chip tool need to communicate with route， it found device in ble av，and commission in pase through ble， the comminucate with route with ipv6 packages(to send commission complete command for example).

_

Okay what you are trying to mention is bridge found via BLE commissioning in PASE via BLE then chiptool communicates about bridge to router in ipv6 packets format and thats how border router also gets to know about a new device ?

2: matter is base on ipv6, so it supports all ethernet and wifi dn thread ,only because they all base on ipv6. matter supports thread well ,but cant say that thread is a bese for matter.

see my point i was reading on internet as well and i found below stuff :

**Every Matter node begins its participation in a Matter network after it is commissioned (**the initial configuration of the device) by a commissioner (say a phone app that configures the device). Matter Commissioning During the process of commissioning, the commissioner will provide the node with the Node Operational Certificate (NOC) and the Trusted Root CA Certificate. This is when we say that the bulb has joined the Matter Fabric green (technically Matter Fabrics have a 64-bit identifier, we are just using green for convenience here).

so what exactly is this matter network that is agreed that it is having a collection of matter nodes but what is this network actually is it subnetwork in thread / wifi kind of thing?

it may be wifi or ethernet or thread，and the commissioning include install noc cert for auth between nodes（which consists of fabric）， and configure device to connected to a real physical network like wifi or thread。 so ，matter commission include both application register（and auth），and physical connection， it is easy to understand ，for example， your computer connected to a wifi and your facebook cononnect to facebook network，matter network is more likely a facebook network style.exception it help device connect to real wifi or thread.

from connectedhomeip.

If i summarize the whole concept it will be like follow

During commissioning phase ,

1. chiptool will find matter bridge via BLE Adv (ble-thread)
2. chiptool will cont. commissioning in PASE over BLE
3. chiptool communicates with OTBR about commissiioned Device and configures the matter bridge to work in Thread network .
4. and in thread network we have our logical matter network formed at higher layer

is that fine to summarize the stuff
and also below is my understanding on matter network(logical) which is on top of physical network

from connectedhomeip.

Anyone can please confirm the understanding as part of last message ? so that we can close the ticket

from connectedhomeip.

step 3 may be a litter different , after step 2, chip-tool has done send thread infos to bridge app, then bridge app is the one responsed to communicate with Thread roles like thread route to join the thread ,after that ,communication happens after step 4 in thread technology to control device or update states.

from connectedhomeip.