Location on server of webpage push about sindri HOT 3 CLOSED

Yep, fully decoupling the config from the code is the main thing in work for v0,3.0. In particular, website.py and the lektorproject will be configurable outside of the code, falling back to the current defaults if anything isn't specified. It'll use Brokkr's existing config management system, so you can set most things at the system level and then any unit-specific overrides on the device, and I'd add a small feature that will autofill the unit name and number in standard placeholders in the lektorproject so it should be usable out of the box with no additional per-unit config. This will also be needed for the Sindri instance running on the VPS.

from sindri.

Fixed in deployed v0.3.0a1 with the config being pulled out to mjolnir-hamma and automatically pushing to the correct subdir determined by the Brokkr unit number; PR incoming. In v0.3.0a2, Sindri won't need to run on the Pis at all, just once on the server.

from sindri.

Resolved by #18

from sindri.