Mavic 3 DroneID descrambling about dji_droneid HOT 2 CLOSED

This repo assumes that the first OFDM symbol (first symbol in the 9-symbol case) is not present as it's not important. So you shouldn't have to remove any OFDM symbols. Each burst only contains 2 OFDM symbols with ZC sequences. Could you show me where I mistakenly wrote 4? I'd like to fix that.

In the 9 OFDM symbol case there are really just 6 data symbols as the first "data" symbol is a duplicate of the first. That's why it's safe to ignore the first symbol. I'm not sure that the Mavic 3 uses the same signal structure, so I can't really tell you what should or should not change =\

from dji_droneid.

Thanks for your answer. I was referring to this guide: https://github.com/proto17/dji_droneid/wiki/DJI-Mavic-3-DroneID-Analysis .
Anyway, I was able to solve the problem: I was simply looking at the wrong bursts. It seems that the Mavic 3 trasmits two types of message in addition to the video downlink. One is the standard Drone ID which is similar to Mini 2's, the other one is this strange message using 4 ZC sequences.
With the correct bursts the decoding process went ok.

from dji_droneid.