Comments (16)
I'm using macOS which is all updated to the latest version. I have a AirPort Extreme AC providing my network connection. The Octopi connected to the Printer is accessible at pursa.local and of course it's IP address too. Entering the details in to slic3r manually either IP or pursa.local works just fine, the search option causes slic3r to crash.
Thanks, I will look into it once I get a hold of some Bonjour capable IP router, which quite hard to get hold of. Normally if you issue a Bonjour discovery packet on a network, nothing happens as this packet is not understood by the router. So it is hard to debug.
Vojtech
from prusaslicer.
Reason above seems odd, since no IP router is required. One can simply setup Internet sharing on their WiFi network interface and associate the RPi with it.
from prusaslicer.
Reason above seems odd, since no IP router is required. One can simply setup Internet sharing on their WiFi network interface and associate the RPi with it.
It certainly does not work if I have the R-PI connected to a different segment of a network, if the network does not support Bonjour.
from prusaslicer.
Newly released Slicer 1.3.3-8 still does not resolve
from prusaslicer.
@fiveangle by the way, which system? Linux / OSX or Windows32 or Windows 64bit?
from prusaslicer.
Tested on Windows and Debian Linux. Works on Windows, crashes on Debian. Likely some dependencies are missing in the binary package.
It only crashes if there are some Bonjour devices on the network. It works, if there are none.
from prusaslicer.
Added Net/DNS/RR/A.pm and AAAA.pm to the Linux binary distribution.
Binaries will be released soon.
from prusaslicer.
@bubnikv - My comment was in response to this thread specifically:
I'm using macOS which is all updated to the latest version.
So didn't stipulate the OS, but it is Mac OS 10.12.3 ("Sierra", which is 64-bit only). I definitely have other Bonjour enabled and active devices on the network. Host and RPi connected to same class C network segment running WPA2 on Apple Airport Extreme AC with direct WiFi communication allowed. One thing of note is SSID is Unicode string with double-byte charicters and not simple ASCII, but I don't think that is relevant in this context.
-=dave
from prusaslicer.
from prusaslicer.
Slic3r-1.34.1-prusa3d-full-201704060802 - bombs away !
from prusaslicer.
Awaiting new build
from prusaslicer.
@bubnikv - This appears fixed with Prusa 1.35.2
from prusaslicer.
Although, I will say it takes an awfully long time (approx 10s) and triggers the pinwheel of death for the last few seconds before presenting the octoprint instance selection dialog, but it does eventually work ! 👍
from prusaslicer.
I just verified that the binary distribution of Slic3r-1.34.1 contains the same set of files as the Slic3r-1.35.2, and I am not aware of any pertinent change to the Octoprint handling between 1.34.1 and 1.35.2, but I will happily close this issue :-)
Anyway, there is an issue in regard to OctoPrint and HTTPS. Maybe it has something to do with your case?
#294
from prusaslicer.
I just verified that the binary distribution of Slic3r-1.34.1 contains the same set of files as the Slic3r-1.35.2,
I meant they contain the same set of Perl modules and native libraries.
from prusaslicer.
If it crashes again will resubmit.
from prusaslicer.
Related Issues (20)
- [Mac] Scrolling layer preview scrolling doesn't "stick" at the top
- Unnecessary "Top solid infill" adds complexity to flat surface HOT 1
- Organic supports are generated outside of build plate HOT 6
- Opion for Every top surface printed with only 1 perimeter HOT 1
- Some Chinese translations are wrong in version 2.7.4
- Complete individual object improvement for higher objects HOT 3
- Splitting multiple, hollow STLs (that you have earlier Merged), gives insane results. HOT 3
- Custom part settings invisible after reloading .3mf saved project
- When I save a set of print settings, very few settings are actually saved. When I open Prusa Slicer for a new project, I have to go and reset all of the same settings over and over and over. I would LOVE a preference page that allows me to set USER DEFAULTS. HOT 3
- Scroll bar too small when comparing filament presets settings
- Retraction custom g-code
- PrusaSlicer Crashing with the attached project HOT 4
- Physical Printer dialog doesn't use password entry box, leaving password in clear text
- Add Rectilinear Interlaced Interface Layers HOT 2
- graphics card is not accelerating the sliced view
- Different Tabs - Account Synchronization - Favorite Settings Page - Calibration Tests
- Adding filament changes during sequential prints
- Bridge is too narrow with a scaled down 3DBenchy
- Issue when using colorchange
- Support painting not working on mirrored models
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from prusaslicer.