Comments (17)
Naesstrom
commented on July 4, 2024
2
Uploaded the STL's for the box here. Tight fit but looks nice!
https://www.thingiverse.com/thing:4961372
from esphome-p1reader.
Naesstrom
commented on July 4, 2024
1
absolutely @psvanstrom, I can update you once I get the PCB's to. I ordered a bunch so I can send you one!
from esphome-p1reader.
psvanstrom
commented on July 4, 2024
This is awesome @Naesstrom! Can I incorporate your PCB image and the link to the PCB into the README.md of this project?
from esphome-p1reader.
psvanstrom
commented on July 4, 2024
Thanks @Naesstrom! I updated the README with your PCB design. I would love to try out the PCB once you get it delivered 🙏
from esphome-p1reader.
TobbeWendt
commented on July 4, 2024
@Naesstrom I am interested to by 1-2 boards from you if possible. I live in Sweden.
from esphome-p1reader.
Naesstrom
commented on July 4, 2024
Got them today but the 6/6 contacts from electrokit that I had didn't fit. If you have ordered from somewhere else they might fit tough!
This are the ones that didn't fit: https://www.electrokit.com/en/product/modular-connector-6-6-pcb/
This is the model I used: https://lcsc.com/product-detail/Ethernet-Connectors-Modular-Connectors-RJ45-RJ11_CONNFLY-Elec-DS1133-S60APS_C77857.html
So either I have to source a new 6/6 contact or order new pcbs
from esphome-p1reader.
psvanstrom
commented on July 4, 2024
Awesome, I'll add it to the README 👍
from esphome-p1reader.
SchneHa
commented on July 4, 2024
R1 and R2 has to be changed
The PCB should be improved by inserting a electrolytic cap of at least 1000µF/16V between 5V and GND and a jumper to cut RX to make it easy flashable if built in enclosure
The thing files of the enclosure doesn't have a lid for the large version that fits. It seems to be molded with the enclosure itself to get a totally closed enclosure.
from esphome-p1reader.
SchneHa
commented on July 4, 2024
Regarding the thing files:
Here you can find files for a well fitting enclosure with lid as a remix of the original: https://www.thingiverse.com/thing:5564796
The PCB still needs an improvement.
from esphome-p1reader.
cenobitedk
commented on July 4, 2024
@Naesstrom Do you have any extra PCB you're selling?
from esphome-p1reader.
SchneHa
commented on July 4, 2024
Hello Jeppe,
sure, but at the moment I‘m not at home for the next 3 weeks.
Do you need the PCB only but also other parts?Best regards,
Hans
from esphome-p1reader.
cenobitedk
commented on July 4, 2024
@SchneHa Cool, I need the PCB and the 6P6 connecter if you have it? I have loads of resistors etc. already. Thanks
from esphome-p1reader.
SchneHa
commented on July 4, 2024
Sure, and I think you need the capacitor as well as it has to fit between the connectors.
Where are you?
from esphome-p1reader.
SchneHa
commented on July 4, 2024
I think it was a misunderstanding. I‘m talking about this device: github.com
from esphome-p1reader.
cenobitedk
commented on July 4, 2024
Not sure what you are linking to, I only see "github.com" and no link.
from esphome-p1reader.
SchneHa
commented on July 4, 2024
Sorry, chopped by mistake: https://github.com/SchneHa/P1-WiFi-Gateway
from esphome-p1reader.
cenobitedk
commented on July 4, 2024
Ah, yeah, ok, that's not what I'm looking for :) thanks anyway
from esphome-p1reader.
Related Issues (20)
- Extend the esp to act as active repeater to connect additional P1 device HOT 2
- HDLC support missing (is AIDON meters really supported?)
- Instability Frequent Drop out HOT 3
- Compile Error with esp-idf Framework HOT 2
- Add XIAO ESP32C3 to hardware section of readme.md
- Aidon meter and slimmelezer-wt32-eth01 HOT 5
- Landis Gyr e360 lte HOT 1
- SlimmeLezer+ with HDLC stops working HOT 1
- dual tariff HOT 2
- CRC Pass=no after a while HOT 3
- Update interval HOT 3
- Strange readings HSP Meter HAN port
- Problem error
- Custom components are deprecated HOT 3
- Slimmelezer not response after HAN plugged HOT 1
- CRC error, start block occasionally corrupted
- Data error on SlimmeLezer+
- InvalidJSONFile
- Unsigned negative current HOT 2
- ESP-12 p1reader.yaml HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from esphome-p1reader.