Debug not showing expected output. about esphome-p1reader HOT 4 OPEN

Wow, It actually worked. That code and a small change to invert the pin and voilá.
I also added a small capacitor between +5V and Ground since I saw it flicker.

from esphome-p1reader.

Did you solve it? I get exactly the same data as you, when the pin is inverted.

from esphome-p1reader.

Yes and no.

I figured out that the issue is that the Aidon meter uses a different communication standard. To rule out my own hardware i bought a SlimmeLezer+ but still no go.

I also bought a P1IB, that had a setting specific for the Aidon meter, and that worked!

After setting up the P1IB i was also shared this library that are supposed to get the SlimmeLezer to work with the Aidon meter, i have not tried it, but i expect that it could work also for this P1 reader:
https://mega.nz/file/U4UTULpJ#KhJYfEhRiUQ8CI5l7ypDbKKFp0NIb4si4qWBB8GGI6I

Good luck!

from esphome-p1reader.

Thanks for the reply! I have a hard time getting hardware delivered to me at the time. I would love to buy a finished product to just plug in but I will try out the code you provided for now and see if it makes any difference. I can post an update here if you are interested in knowing how it went. Take care.

from esphome-p1reader.