rcuquemelle Goto Github PK

ad9833_library_rp2040

C library to control an AD9833 Function Generator IC

adafruit-updi-friend-pcb

PCB files for the Adafruit UPDI Friend - USB Serial UPDI Programmer

amsreader-firmware

ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

amstomqttbridge

Minimalistic system to read AMS/HAN data from electrical meter

arduino-stm32

arduinocore-efm32

Arduino core for EFM32HG and Tomu boards (very much work in progress)

arduinoocpp

OCPP 1.6 client for ESP32 / ESP8266

athom-configs

Athom Technology Official Center

attiny412-i2c-rotary-encoder

Rotary Encoder with I²C Interface

avr-programmer

Collection of AVR Programmers and Accessories

buzzard

Software tools for EAGLE silkscreen generation

bwlr1b

Teapot BWLR1B: Wireless Environmental Sensor over LoRa

cc100-howtos

Here you will find all the example code for extensions and tools for the cc100

cc100-mid-dashboard

This repo describes how to set up a sample dashboard for the WAGO MID in Node-RED

cc2652_zigbee_zed

Hardware/Software for a complete Zigbee-End-Device based on the CC2652

cc2652p_board

mini-dev board on E72-2G4M20S1E or RF-BM-2652P2

cc2652p_cc1352p_rf-star

Hardware development for RF-STAR 2652/1352 modules

ccs32berta

ESP32 talks via SPI with QCA7005 PLC modem

centralchargingsystem

Controlling & Monitoring Charging Stations via OCPP

charge-point-simulator-via-ocpp-2.0.1

This is a emulator for huge numbers of charge points, that connect to central system through web socket and implement OCPP 2.0.1

chargepi-go

⚡ChargePi is an open-source ⚡Charging Point🔌 project based on the Raspberry Pi. The client is written in Go and uses OCPP protocol to communicate with a central system. It is configurable and can use off-the-shelf hardware: a tag reader, RGB 🚥LED strip, power meter, relay and a LCD.

cinepi-raw

raw cinema dng recorder application based on libcamera-apps.

connectedhomeip

Matter (formerly Project CHIP) creates more connections between more objects, simplifying development for manufacturers and increasing compatibility for consumers, guided by the Connectivity Standards Alliance.

cpd-ocpp

Open Charge Point Protocol

d7s-grove-arduino

denky-d4

Denky D4 WiFi Teleinfo

digital-energy-contrib-discovergy-meter

Digital Energy - Quick start energy management

dlan-greenphy-sdk

The devolo dLAN Green PHY module is ideal for installation in all IoT-devices. Includes QCA7000 chipset and LPC1758 host processor.

dspic33ep_iec61851_j1772_chargeport_evse

Firmware for IEC61851/J1772 Vehicle Charge Port (Vehicle Side) & EVSE (Supply Side)

duosidaev-home-assistant

Duosida D EV Charger Integration