rikthir Goto Github PK

3dprintercase

Stand Alone Main Control Case with Modular Mounts for Various Mainboards, Display's, RPi's, Fans amd MORE!

arduino_stm32

Arduino STM32. Hardware files to support STM32 boards, on Arduino IDE 1.8.x including LeafLabs Maple and other generic STM32F103 boards

bigtreedesignassistant

bigtreetech-s42b-v1.0

The closed-loop drive is to feedback the rotation angle of the stepping motor to the control panel, compare the distance that needs to be rotated with the distance of the actual rotation, calculate the error value, and then compensate, so as to prevent the problem of multi-step and lost step. The closed-loop drive can completely overcome the lost step of the open-loop stepping motor, and can also significantly improve the performance of the motor at high speed

bigtreetech-skr-e3-dip-v1.0

BIGTREETECH SKR-E3-DIP-V1.0 motherboard is launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD. This board is specially tailored for Ender 3 printer, perfectly replacing the original Ender3 printer motherboard.

bigtreetech-skr-v1.3

32bit board with LPC1768, support marlin2.0 and smoothieware, support lcd2004/12864, On-board TMC2130 SPI interface and TMC2208 UART interface no additional wiring is required

bigtreetech-touchscreenfirmware

support TFT35 V1.0/V1.1/V1.2/V2.0/V3.0, TFT28, TFT24 V1.1

btt-sd-tf-cloud-v1.0

BTT SD/TF Cloud V1.0 is launched by the 3D printing team of ShenZhen BigTree Technology CO.,LTD ., which is a module for wireless file transmission between the master computer and the 3D printer, so that you can get rid of the constraint of plugging SD card.

btt-writer-v1.0

BigTree Technology Co., Ltd. developed this module for the use on firmware flashing, serial port debugging and so on.

configurations

Configurations for Marlin Firmware

esp32core

esp32 core

esp3d

FW for ESP8266/ESP8285/ESP32 used with 3D printer

firmware

This repository contains pre-compiled binaries of the current Raspberry Pi kernel and modules, userspace libraries, and bootloader/GPU firmware.

marlin

Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.

marlintool

A shell script for setting up a standalone Marlin build environment on Raspberry Pi and Linux in general.