hbbs -k ""

It's no use

from rustdesk-server.

if you run docker logs rustdesk-server to pull the logs.
At the startup sequence, search for Key: and compare with what you have.

from rustdesk-server.

This version changes default -k of hbbs to -, which means setting key on client side is mandatory. If you want to run empty -k as before, please run hbbs -k "".

from rustdesk-server.

@rustdesk Oh I see....could it be that I did not run into an error because I have ENCRYPTED_ONLY as true?

yes

from rustdesk-server.

It was only after changing the language setting that I figured out the Key was wrong. In my language the error was "Wrong code" which lead me down the wrong path. Adding the key from hbbs logs into the client fixed it for me. So thank you all.

from rustdesk-server.

yes I upgraded too. and I have same key mismatch. cannot connect. please advise

from rustdesk-server.

are you sure your server keys did not change during the upgrade? Compare your installed pub key with your RustDesk client.

from rustdesk-server.

from rustdesk-server.

@rustdesk Oh I see....could it be that I did not run into an error because I have ENCRYPTED_ONLY as true?

from rustdesk-server.

This version changes default -k of hbbs to -, which means setting key on client side is mandatory. If you want to run empty -k as before, please run hbbs -k "".

I set the key on the client and running hbbs still prompts key mismatch

from rustdesk-server.

Are you sure you set the the Public key on the client? Not the private!

from rustdesk-server.

from rustdesk-server.

Adding public key to client fixed it. If running AIO ruskdesk server container just open logs, it will show you the public key.

from rustdesk-server.

from rustdesk-server.

from rustdesk-server.

Maybe I find a way. There is a an extra "#" in pub key.
run docker logs hbbs can check the key you need. I have observed that the key within the logs differs from the key in the pub key. like this:
key in the log:

key in the pub key:

There is a an extra "#", before I observed that, I entered the pub key by copying the out of cat id_ed25519.pub, then when I tried to connect my PC, it prompted Key Mismatch.
Now I use the key without "#" at the end, and enter both ID server and Relay server with ip:21116、ip:21117，it works.
And whether latest image 1.1.11 or 1.1.10-3, it works all.

from rustdesk-server.

from rustdesk-server.