Dyson Local integration success, but didn't update about ha-dyson HOT 11 CLOSED

Try if the latest version fixed your problem.

from ha-dyson.

I'm seeing the same behavior for about a week now. Sending commands works well, but reading the status doesn't update.
Docker HA 2021.3.4 + ha-dyson 0.8.1 (local only with manual setup) + HP04

from ha-dyson.

Not entirely sure if related but for a few weeks I have had issues where the Thermostat card is not updating and it wont accept commands.

Removed everything and set it up again with the same result.

Integration shows 11 entities under Dyson Local and confirmed I have the correct entity selected.

from ha-dyson.

Yes, we're looking into this issue in #24

So far it looks like a connection issue. My fans have a flakey wifi connection and HA-Dyson has a reconnection bug at the moment. For me it means after a couple hours this integration fails receiving state info (on/off, temp, pollution levels etc), you can still control the fan as its still sending out MQTT commands.

from ha-dyson.

I updated to the new version and tested. Working again.

from ha-dyson.

Upgraded HA to 2021.4.0 yesterday, still using ha-dyson 0.8.1 with my HP04 and connectivity has been stable for the past 24h. Odd.

[Edit 2021-04-12] It finally failed [as reported earlier above] after 3 days. Upgraded to 0.10.0.
[Edit 2021-04-19] ha-dyson local works wonderfully after the upgrade to 0.10.0. Upgraded HA to 2021.4.5 as well. Looks like the fix works.

from ha-dyson.

Same, works great. Thanks again @shenxn

from ha-dyson.

Hello All,

Updated HA and dyson local, cloud to the latest version, it's work great

Shenxn Thank you so much ^o^/

from ha-dyson.

Upgraded HA to 2021.4.0 yesterday, still using ha-dyson 0.8.1 with my HP04 and connectivity has been stable for the past 24h. Odd.

[Edit 2021-04-12] It finally failed [as reported earlier above] after 3 days. Upgraded to 0.10.0.

@yogoo Do you find anything related in log?

from ha-dyson.

Upgraded HA to 2021.4.0 yesterday, still using ha-dyson 0.8.1 with my HP04 and connectivity has been stable for the past 24h. Odd.
[Edit 2021-04-12] It finally failed [as reported earlier above] after 3 days. Upgraded to 0.10.0.

@yogoo Do you find anything related in log?

@shenxn I couldn't find anything useful. I'm running HA in docker and it seems that the logs (/config/home-assistant.log) are cleared after every restart of HA.

from ha-dyson.

@yogoo I'll close this for now. Feel free to open a new issue if you encountered this again.

from ha-dyson.