Can't configure Dyson Pure Hot+Cool Link (wrong device type discovered) about ha-dyson HOT 12 CLOSED

What is your device WiFi SSID? You can mask the serial part.

from ha-dyson.

DYSON-AAN-AU-AAANNNNA-455A

from ha-dyson.

Is this a pretty new device? Since 455A is not in the device type map yet.

from ha-dyson.

To be honest, I don't know how new or when it was manufactured. It was purchased by the end of 2020.

from ha-dyson.

Version 0.13.0 should have fixed this. Please try re-add device.

from ha-dyson.

Closing for now. Feel free to reopen if the problem still existed.

from ha-dyson.

Hi shenxn,

Thanks for the integration. I'm having the exact some issue with the setup. Below are the logs:

2021-06-19 00:29:14 DEBUG (MainThread) [custom_components.dyson_local.config_flow] Successfully parse WiFi information
2021-06-19 00:29:14 DEBUG (MainThread) [custom_components.dyson_local.config_flow] Serial: SZ1-AU-NEA1727A
2021-06-19 00:29:14 DEBUG (MainThread) [custom_components.dyson_local.config_flow] Device Type: 455A
2021-06-19 00:29:14 DEBUG (MainThread) [custom_components.dyson_local.config_flow] Device Type Name: Pure Hot+Cool Link (New)
2021-06-19 00:29:15 DEBUG (zeroconf-ServiceBrowser__360eye_mqtt._tcp.local.-_dyson_mqtt._tcp.local._266) [custom_components.dyson_local.config_flow] Found device at 192.168.86.200
2021-06-19 00:29:15 DEBUG (Thread-15) [libdyson.dyson_device] Connected with result code 0
2021-06-19 00:29:15 INFO (MainThread) [libdyson.dyson_device] Connected to device SZ1-AU-NEAxxxxx
2021-06-19 00:29:35 DEBUG (Thread-15) [libdyson.dyson_device] Disconnected with result code 0
2021-06-19 00:29:35 DEBUG (MainThread) [custom_components.dyson_local.config_flow] Failed to connect to device:

from ha-dyson.

Apologies for not reporting back before. I have the same connection issue as @chris-chensy is reporting.
Attempting setup via WiFi information or manual configuration, both end up with a Failed to connect to device message.

I can confirm that the WiFi information process is parsing the WiFi SSID to the new Device Type, but it fails connection.

from ha-dyson.

@anarcometin @chris-chensy Can you try set up through manual configuration and select the old 455 model to see if it works? Thanks.

from ha-dyson.

I've released version 0.15.0. Hopefully it fixes your problem.

from ha-dyson.

Thanks for the effort and the integration! I also have not been able to get it to work. I've been trying to configure for the last few days, but not having any luck. I've updated to 0.15.0, but still no luck.

My SSID is: DYSON-SZ2-AU-XXXXXXXX-455A
My country code is: AU

Device shows up in dyson-cloud (sometimes, but keeps disappearing every now and then). Sometimes libdyson:get_devices.py works and sometimes fails. I've tried manual config selecting all pure hot+cool options, and keep getting:

Failed to find the device using discovery

or if I fill in the host:

Failed to connect to device

from ha-dyson.

If that is the case, we need to somehow figure out the protocol. I'll write a small script so that you can run and test.

Edit: @ariell Can you first try using MQTT explorer? Use serial as mqtt username and credential as mqtt password. Then open your Dyson mobile app, send some commands to your device, and see what you can find in MQTT explorer.

from ha-dyson.