attribute angle_low & angle_high is not updating for TP04 about ha-dyson HOT 11 CLOSED

@mont3crysto There is no change to the angle functionality recently. Can you first try unplug and re-plug your fan? If it does not work, it is better to create a new issue for your problem.

from ha-dyson.

Can you enable debug mode and change angles in the mobile app. Then find STATE CHANGE logs. To enable debug mode, add the following lines to your configuration.yaml

logger:
  default: info
  logs:
    libdyson: debug

from ha-dyson.

this is logs

2021-06-01 00:35:40 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-05-31T16:35:40.000Z', 'mode-reason': 'PRC', 'state-reason': 'MODE', 'product-state': {'fpwr': ['OFF', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['OFF', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['OFF', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0135', '0135'], 'osau': ['0225', '0225'], 'ancp': ['0090', '0090'], 'fdir': ['OFF', 'OFF']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-01 00:35:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:35:54.000Z', 'data': {'tact': '2967', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0999', 'p10r': '0999', 'sltm': 'OFF'}}
2021-06-01 00:36:24 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:36:24.000Z', 'data': {'tact': '2967', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0989', 'p10r': '0999', 'sltm': 'OFF'}}
2021-06-01 00:36:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:36:54.000Z', 'data': {'tact': '2968', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0923', 'p10r': '0999', 'sltm': 'OFF'}}
2021-06-01 00:37:37 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:37:37.000Z', 'data': {'tact': '2968', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0884', 'p10r': '0978', 'sltm': 'OFF'}}
2021-06-01 00:37:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:37:54.000Z', 'data': {'tact': '2969', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0896', 'p10r': '0963', 'sltm': 'OFF'}}
2021-06-01 00:38:24 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:38:24.000Z', 'data': {'tact': '2969', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0835', 'p10r': '0931', 'sltm': 'OFF'}}
2021-06-01 00:38:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:38:54.000Z', 'data': {'tact': '2970', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0853', 'p10r': '0930', 'sltm': 'OFF'}}
2021-06-01 00:39:24 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:39:24.000Z', 'data': {'tact': '2970', 'hact': '0089', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0847', 'p10r': '0921', 'sltm': 'OFF'}}
2021-06-01 00:39:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-05-31T16:39:54.000Z', 'data': {'tact': '2971', 'hact': '0088', 'pm25': '0149', 'pm10': '0149', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0790', 'p10r': '0873', 'sltm': 'OFF'}}

'osal': ['0135', '0135'], 'osau': ['0225', '0225'] not payload to change

from ha-dyson.

It seems that the field ancp is related. Can you try different combination of angles in app / remote control and see if you can get different values.

from ha-dyson.

turn off fan swings

2021-06-05 23:55:18 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T15:55:18.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-63', 'channel': '6', 'fqhp': '80976', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0190', 'osau': '0235', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-05 23:55:29 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-05T15:55:29.000Z', 'mode-reason': 'RAPP', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'OFF'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0190'], 'osau': ['0235', '0235'], 'ancp': ['CUST', 'CUST'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-05 23:55:33 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-05T15:55:33.000Z', 'mode-reason': 'RAPP', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'OFF'], 'oson': ['OFF', 'OFF'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0190'], 'osau': ['0235', '0235'], 'ancp': ['CUST', 'CUST'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-05 23:55:48 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T15:55:48.000Z', 'mode-reason': 'RAPP', 'state-reason': 'MODE', 'rssi': '-64', 'channel': '6', 'fqhp': '80976', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'OFF', 'oson': 'OFF', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0190', 'osau': '0235', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}

Change to 45 degrees

2021-06-05 23:57:24 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T15:57:24.000Z', 'mode-reason': 'RAPP', 'state-reason': 'MODE', 'rssi': '-61', 'channel': '6', 'fqhp': '80544', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'OFF', 'oson': 'OFF', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0190', 'osau': '0235', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-05 23:57:26 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-05T15:57:27.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['OFF', 'ON'], 'oson': ['OFF', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0198'], 'osau': ['0235', '0243'], 'ancp': ['CUST', 'CUST'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-05 23:57:54 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T15:57:54.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-71', 'channel': '6', 'fqhp': '80544', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0198', 'osau': '0243', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}

Change to 90 degrees

2021-06-05 23:59:53 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T15:59:53.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-61', 'channel': '6', 'fqhp': '80544', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0198', 'osau': '0243', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-05 23:59:56 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-05T15:59:56.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0198', '0175'], 'osau': ['0243', '0265'], 'ancp': ['CUST', 'CUST'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 00:00:14 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T16:00:14.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-63', 'channel': '6', 'fqhp': '80104', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0175', 'osau': '0265', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}

Change to 180 degrees

2021-06-06 00:04:40 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T16:04:40.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-62', 'channel': '6', 'fqhp': '80544', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0175', 'osau': '0265', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 00:04:43 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-05T16:04:44.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0175', '0130'], 'osau': ['0265', '0310'], 'ancp': ['CUST', 'CUST'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 00:05:10 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T16:05:10.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-64', 'channel': '6', 'fqhp': '80544', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0130', 'osau': '0310', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}

Change to 350 degrees

2021-06-06 00:08:31 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T16:08:31.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-60', 'channel': '6', 'fqhp': '80536', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0130', 'osau': '0310', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 00:08:34 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-05T16:08:34.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0005', '0005'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0130', '0005'], 'osau': ['0310', '0355'], 'ancp': ['CUST', 'CUST'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 00:08:35 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'CURRENT-STATE', 'time': '2021-06-05T16:08:35.000Z', 'mode-reason': 'LAPP', 'state-reason': 'MODE', 'rssi': '-61', 'channel': '6', 'fqhp': '80976', 'fghp': '50984', 'product-state': {'fpwr': 'ON', 'auto': 'OFF', 'oscs': 'ON', 'oson': 'ON', 'nmod': 'OFF', 'rhtm': 'OFF', 'fnst': 'FAN', 'ercd': 'NONE', 'wacd': 'NONE', 'nmdv': '0004', 'fnsp': '0005', 'bril': '0002', 'corf': 'ON', 'cflr': '0098', 'hflr': '0099', 'cflt': 'CARF', 'hflt': 'PHEP', 'sltm': 'OFF', 'osal': '0005', 'osau': '0355', 'ancp': 'CUST', 'fdir': 'ON'}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}

from ha-dyson.

@superman110 Thanks for your info. According to the log, it seems that osal and osau are the fields for angles, which means currently it should work correctly. Can you double check?

from ha-dyson.

The log above is dyson link app, and the log below is my remote control, ‘osal’ and ‘osau’ not change, ‘ancp’ is the current angle and the target angle

2021-06-06 13:16:20 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-06T05:16:21.000Z', 'mode-reason': 'PRC', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['OFF', 'ON'], 'oson': ['OFF', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0004', '0004'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0190'], 'osau': ['0235', '0235'], 'ancp': ['CUST', '0180'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 13:16:24 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-06-06T05:16:24.000Z', 'data': {'tact': '2975', 'hact': '0072', 'pm25': '0092', 'pm10': '0082', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0079', 'p10r': '0090', 'sltm': 'OFF'}}
2021-06-06 13:16:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-06-06T05:16:54.000Z', 'data': {'tact': '2976', 'hact': '0071', 'pm25': '0086', 'pm10': '0073', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0067', 'p10r': '0080', 'sltm': 'OFF'}}
2021-06-06 13:17:24 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-06-06T05:17:24.000Z', 'data': {'tact': '2976', 'hact': '0071', 'pm25': '0080', 'pm10': '0071', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0063', 'p10r': '0077', 'sltm': 'OFF'}}
2021-06-06 13:17:31 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-06T05:17:31.000Z', 'mode-reason': 'PRC', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0004', '0004'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0190'], 'osau': ['0235', '0235'], 'ancp': ['0180', '0045'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 13:17:35 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-06T05:17:36.000Z', 'mode-reason': 'PRC', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0004', '0004'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0190'], 'osau': ['0235', '0235'], 'ancp': ['0045', '0090'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}
2021-06-06 13:17:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-06-06T05:17:54.000Z', 'data': {'tact': '2977', 'hact': '0072', 'pm25': '0078', 'pm10': '0071', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0060', 'p10r': '0077', 'sltm': 'OFF'}}
2021-06-06 13:18:24 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-06-06T05:18:24.000Z', 'data': {'tact': '2977', 'hact': '0071', 'pm25': '0078', 'pm10': '0069', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0060', 'p10r': '0074', 'sltm': 'OFF'}}
2021-06-06 13:18:54 DEBUG (Thread-8) [libdyson.dyson_device] New environmental state: {'msg': 'ENVIRONMENTAL-CURRENT-SENSOR-DATA', 'time': '2021-06-06T05:18:54.000Z', 'data': {'tact': '2978', 'hact': '0070', 'pm25': '0078', 'pm10': '0070', 'va10': 'INIT', 'noxl': 'INIT', 'p25r': '0060', 'p10r': '0075', 'sltm': 'OFF'}}
2021-06-06 13:19:02 DEBUG (Thread-8) [libdyson.dyson_device] New state: {'msg': 'STATE-CHANGE', 'time': '2021-06-06T05:19:03.000Z', 'mode-reason': 'PRC', 'state-reason': 'MODE', 'product-state': {'fpwr': ['ON', 'ON'], 'auto': ['OFF', 'OFF'], 'oscs': ['ON', 'ON'], 'oson': ['ON', 'ON'], 'nmod': ['OFF', 'OFF'], 'rhtm': ['OFF', 'OFF'], 'fnst': ['FAN', 'FAN'], 'ercd': ['NONE', 'NONE'], 'wacd': ['NONE', 'NONE'], 'nmdv': ['0004', '0004'], 'fnsp': ['0004', '0004'], 'bril': ['0002', '0002'], 'corf': ['ON', 'ON'], 'cflr': ['0098', '0098'], 'hflr': ['0099', '0099'], 'cflt': ['CARF', 'CARF'], 'hflt': ['PHEP', 'PHEP'], 'sltm': ['OFF', 'OFF'], 'osal': ['0190', '0190'], 'osau': ['0235', '0235'], 'ancp': ['0090', '0350'], 'fdir': ['ON', 'ON']}, 'scheduler': {'srsc': '0000000000000000', 'dstv': '0000', 'tzid': '0001'}}

from ha-dyson.

So, when using this integration with mobile app, everything works. But if you change angles on the remote, the integration stops updating angles. Is that correct?

from ha-dyson.

Can you provide screenshots on the mobile app when you change angles in app and remote? How the app show its status?

from ha-dyson.

Sorry for intervening - and also if it isn't the right place to discuss my issue, but I can't change anymore the angles of my fan; is the feature being removed/deprecated or I'm encountering a bug of some sort?

Below some information, but feel free to ask me anything to help you (logs or whatever):
Home Assistant version: 2021.3.4
Dyson model: Pure Cool TP04
HACS version: 1.13.2
Dyson Local version: 0.14.0

Thank you for developing this plugin; never had a problem since adopting it while with the official YAML integration I always had some issues.

from ha-dyson.

Hello @shenxn,
at first thanks for your great work :)

About this request/issue there is update?
I will give you a screenshot about the oscillation/angle, if it can help.
If there is a possible to integrate that, its perfect :).

Thanks again and have a nice day :)

from ha-dyson.