Comments (13)
I left the selection on avx512 and replaced the default installed .exe encoder with "3.5+153+15-813ccbff0-.Mod-by-Patman.-x64-avx512-msvc1937"
This would be my solution No. 1. 😅
In fact for the same file it was faster, about 2% and completed without any problem.
So I guess the issue was the combination you had before. So that means for the next releases you give up the AVX512
advantage or you have to (download and) replace the encoder with every StaxRip version you download. It's up to you, the important part is that your encodes finish without issues.
however I use a CPU cooler with ARCTIC Liquid Freezer II 280 A-RGB
And it seems to do a good job. Just thought because of the report, that it could be cloaked up, but that does not seem to be the case.
So I guess we can close this....
from staxrip.
yes. I thank you for your help, however I still reserve the right to perform a test with the default encoder (avx2) by deselecting from the settiung avx521 (solution2).
from staxrip.
Interestingly there were absolutely no changes made in v2.35
that could explain that. Demuxers, encoders, muxers, all the same.
A log file would be nice to see if there is something that could help identifying the issue.
from staxrip.
You are right it is happening even with version 2.34. I don't understand what is happening.
The ..staxrip.log file how lop I attach it?
from staxrip.
Let's see if the log file can help us a bit...
how lop I attach it?
from staxrip.
CIao I attach the file of my x265 encoding process, with my Ryzen 9 7950x processor I use 3 Chunks.
Indy 5 Regrade_staxrip.log
from staxrip.
Are you using the x265.exe
that is delivered with StaxRip or did you replace it?
from staxrip.
I use the version contained in StaxRip "3.5+153+15-813ccbff0-.Mod-by-Patman.-x64-avx2-msvc1937"
from staxrip.
I restored the operating system image and installed version 2.35 again and started a new encoding process let it go overnight, and entered the "Hibernate" command for the end of the process.
Let's see what happens tomorrow.
from staxrip.
You use --asm avx512
with a x265.exe
version, that is just build for AVX2
. That could be the culprit.
So you could try to remove this parameter or you can try another build from here: https://github.com/Patman86/x265-Mod-by-Patman/releases/tag/3.5%2B153%2B15
Regarding your Hibernate
command:
The error message seems to prevent the system from hibernating, so if you want to turn off your PC, you could also disable the error message in Options
, so there will be just a warning in the log file.
from staxrip.
Thank you very much for the advice.
Although I find it very strange that this problem has emerged only a few days ago, and I have never deselected the AVX512 parameter and have always used the x265 encoder embedded in StaxRip.
Maybe thinking about it with the characteristics of my processor maybe it is better to choose the Mod by Patman -x64 avx512 encoder or am I wrong?
Thanks
from staxrip.
If your CPU supports AVX512
then you should at least try it out. There should also be a very small speed up of about 1-3%, but it should also generate more heat.
Nevertheless it would be interesting if that replacing or the removing of --asm avx512
solves your issues.
In case it worked for a longer time period and now starts to make issues, I suggest checking your hardware.
Maybe one or more fans and/or your CPU cooler is/are cloaked up and can't provide the little amount of air your CPU needs for the hard job. Especially when the problem occurs always after/at different times/progresses.
There are many reasons possible. But when you run one encode multiple times and it stops always at different frames, it's probably a hardware issue.
You maybe want to play with the number of chunks, as this might lower the stress on your CPU.
from staxrip.
Hello.
In StaxRip I left the selection on avx512 and replaced the default installed .exe encoder with "3.5+153+15-813ccbff0-.Mod-by-Patman.-x64-avx512-msvc1937" and set the hibernate command as I often do overnight.
You were right about the advice you gave me and I thank you.
In fact for the same file it was faster, about 2% and completed without any problem.
At this point I don't know if I should uncheck avx512 and leave the encoder by Patman avx2
I will do more processing to test the stability, however I use a CPU cooler with ARCTIC Liquid Freezer II 280 A-RGB
from staxrip.
Related Issues (20)
- SvtAv1EncApp: Add VUI metadata import defaulting to incorrect option HOT 1
- Adding Multiple Files fails, if any of the source files have a comma in its name. HOT 1
- Use the same file naming template for Video Comparison as for Preview HOT 7
- SVT-AV1 not working with long paths HOT 1
- Error when opening .srip project files HOT 3
- PSY-SVT-AV1 Weird bug HOT 1
- V2.39.3 Error loading Template by double clicking .srip file yields "System Exception" HOT 3
- Opening a .srip file from file explorer (file association) fails in staxrip 2.39.3 was working in 2.39.2 HOT 1
- Shortcut to Log Files cannot find the folder HOT 1
- L5 metadata has multiple presets HOT 3
- Auto Crop doesn't allow option only when crop is enabled HOT 3
- Using new Progress Highlighting colors on System Colors theme HOT 4
- Getting: Script Error: There is no function named 'FFT3dFilter' HOT 5
- AV1-SVT Preset Changes at Run Time HOT 1
- Ignoring frames when cropping HOT 2
- SvtAvtEncApp AVX512 disabled in bundled Windows binary HOT 4
- Disable automatic starting AutoCrop HOT 2
- Warning "Dolby vision requires VBV settings to enable HRD" HOT 1
- ArgumentException with command line HOT 7
- Loading source file, AutoCrop starts automaticaly after demuxing, indexing ? Why ? HOT 1
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from staxrip.