Clarity on Readme about homebridge-risco-alarm HOT 6 CLOSED

hi,

I have tweaked the authors code to allow this if you have multiple partitions, if you are interested in testing let me know.

it requires you to have your Risco setup as follows:

2 Partitions, 1 for house, 1 for outside. and the house 'Part-Set' needs to only set the sensors you require when in NIGHT mode.

my setup is as follows:

HOME = outside only
AWAY = all set
NIGHT = House in part set mode
OFF = all off.

from homebridge-risco-alarm.

hi,

I have tweaked the authors code to allow this if you have multiple partitions, if you are interested in testing let me know.

it requires you to have your Risco setup as follows:

2 Partitions, 1 for house, 1 for outside. and the house 'Part-Set' needs to only set the sensors you require when in NIGHT mode.

my setup is as follows:

HOME = outside only
AWAY = all set
NIGHT = House in part set mode
OFF = all off.

I don't understand... if sensors are for your system "outside" are perimetral... and so... night must be set only "outside" sensors... and not "home"

from homebridge-risco-alarm.

if you set, Home then Night, it will leave outside alone, thus have both alarmed. my garage is always alarmed unless I want to go in (thus OFF).

from homebridge-risco-alarm.

            "homeCommand": "1:armed",
            "armCommand": "armed",
            "partialCommand": "partially",
            "disarmCommand": "disarmed"

as you see I added 'homeCommand'

from homebridge-risco-alarm.

it not perfect, but the best I can do with my little knowledge with Homebridge.

from homebridge-risco-alarm.

Unfortunately I have 4 partitions in my system and given the climate I cannot compromise the alarm system.

Would like to understand what you implemented to see if I can perhaps get it to work in my instance.

from homebridge-risco-alarm.