Got error when connect a "USB to SATA" device about smartie HOT 6 CLOSED

smartctl 7.1 2020-04-05 r5049 [x86_64-linux-4.18.0-240.el8.x86_64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Micron_5400_MTFDDAK1T9TGA
Serial Number:    XXXXXXXXXXXXXXXXXX
LU WWN Device Id: 5 00a075 XXXXXXX 
Firmware Version: D4MU002
User Capacity:    1,920,383,410,176 bytes [1.92 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-4 (minor revision not indicated)
SATA Version is:  SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Apr 11 22:02:42 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                ( 6697) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  14) minutes.
Conveyance self-test routine
recommended polling time:        (   3) minutes.
SCT capabilities:              (0x0035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   001    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       73
 12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       17
170 Unknown_Attribute       0x0033   100   100   010    Pre-fail  Always       -       0
171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   001    Old_age   Always       -       0
173 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1
174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       8
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       9
194 Temperature_Celsius     0x0022   067   066   000    Old_age   Always       -       33 (Min/Max 21/34)
195 Hardware_ECC_Recovered  0x0032   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
202 Unknown_SSD_Attribute   0x0030   100   100   001    Old_age   Offline      -       0
206 Unknown_SSD_Attribute   0x000e   100   100   000    Old_age   Always       -       0
246 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       36687919
247 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1146532
248 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       658470
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033   100   100   000    Pre-fail  Always       -       11980
210 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
211 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       12
212 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       4

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[root@localhost 3_tools]# cat /etc/redhat-release
CentOS Linux release 8.4.2105
[root@localhost 3_tools]# whoami
root
[root@localhost 3_tools]# python3.11
Python 3.11.0 (main, Nov 21 2022, 00:23:29) [GCC 8.5.0 20210514 (Red Hat 8.5.0-17)] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> from smartie.device import get_all_devices
>>> for device in get_all_devices():
...     print(device.path)
...
KeyboardInterrupt
>>> for device in get_all_devices():
...     print(device.path)
...     print(device.model)
...
/dev/sda
Traceback (most recent call last):
  File "<stdin>", line 3, in <module>
  File "/usr/local/lib/python3.11/site-packages/smartie/scsi/__init__.py", line 135, in model
    identity, sense = self.identify()
                      ^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/smartie/scsi/__init__.py", line 117, in identify
    sense = self.issue_command(Direction.FROM, command16, identity)
            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/local/lib/python3.11/site-packages/smartie/scsi/linux.py", line 67, in issue_command
    raise OSError(ctypes.get_errno())
OSError: 25
>>>