LED night light 3 way Kasa switch about watt HOT 12 CLOSED

I also have the KS210 Kit. What I like about their 3 way switches is they both don't have to be used on the same 3 way circuit. You can use 1 of the KS210s and a normal 3 way switch. Then you can disable the white ring in the Watt app. I have done it several times. If you want to use both KS210s in the same 3way circuit, you can accomplish this by installing one of the KS210s, with the other being the normal 3 way switch. Go into the Watt app and turn off the night light (white ring). Once you do this, swap the KS210 with the other one in the kit. Go back into the Watt app again and turn it off. Then you can finish the install by replacing the normal 3 way switch with other KS210 you had turned off earlier. Then both of them will have the night light off.

from watt.

Hey @hshempel, thank you for the Love :D
I'm just running a simple TP-Link command to turn the LED off so I don't have control of what TP-Link is doing.
So I won't be able to help you...sorry :-/

from watt.

from watt.

What device is are you using for the 3 ways? HS200, HS210, HS220?

from watt.

Do you have the HS210 KIT? Is that?

Using the Kasa App can you see 2 different devices? And using my Watt you can see 2 different devices?
(I do not have any 3-way device so I don't know how the app is acting)

from watt.

I have the same issue. Only 1 out of 2 3 way switches appear in the watt app. Therefore when you turn off the LED light it only turns off on one.

from watt.

@Doblanko so the device that you have is "HS210 KIT"?

from watt.

Yes

from watt.

I was investigating and I don't think it's possible to turn off the led light of the other device. One of the devices is the "master" and the other is "slave". TP-link API is only showing one of them so right now for me that I am using TP-Link could it's only possible to control and to have access to just one of the devices.

from watt.

@elitepuckster that's good to know, thanks for the tip. Maybe @Doblanko and @hshempel can also do the same

from watt.

That is good information! Thank you!

from watt.

I am closing this issue with solution from @elitepuckster
I also have the KS210 Kit. What I like about their 3 way switches is they both don't have to be used on the same 3 way circuit. You can use 1 of the KS210s and a normal 3 way switch. Then you can disable the white ring in the Watt app. I have done it several times. If you want to use both KS210s in the same 3way circuit, you can accomplish this by installing one of the KS210s, with the other being the normal 3 way switch. Go into the Watt app and turn off the night light (white ring). Once you do this, swap the KS210 with the other one in the kit. Go back into the Watt app again and turn it off. Then you can finish the install by replacing the normal 3 way switch with other KS210 you had turned off earlier. Then both of them will have the night light off.

from watt.