Is there ability to use HyperPixel about buildroot-webkit HOT 3 CLOSED

We assume that you are using a RPi 3. If so, you can try the following.

On your running system:

• Copy/save the /boot/overlays/hyperpixel4.dtbo from your running system

On the buildroot-webkit environment:

• To access the boot partition mount it with mount /dev/mmcblk0p1 /mnt
• Copy the previously saved hyperpixel4.dtbo into the /mount/overlays folder
• Add the lines below into the /mount/config.txt file as defined here: https://github.com/pimoroni/hyperpixel4/blob/b71d7805e796cc67449164887cfd01f8607a6bc0/install.sh#L15-L26

dtoverlay=hyperpixel4
overscan_left=0
overscan_right=0
overscan_top=0
overscan_bottom=0
enable_dpi_lcd=1
display_default_lcd=1
display_rotate=0
dpi_group=2
dpi_mode=87
dpi_output_format=0x7f216
hdmi_timings=480 0 10 16 59 800 0 15 113 15 0 0 0 60 0 32000000 6

After that reboot the system. We don't know if the steps above work because the dtbo got compiled on a different system...

from buildroot-webkit.

Did you have success on this?

from buildroot-webkit.

Closing due to no activity.

from buildroot-webkit.