functionalities with Car Android Auto headunit about aacs HOT 11 CLOSED

Theoretically yes. Note, however, that this is very early stage of development and I had only chance to test on my VW family car. I tried testing on Fiat Tipo, but didn't work out of the box - more testing to come. If you wish to test on Opel - great, I should be able to provide guidance, but do not expect it to work without problems at first try.

from aacs.

Ok! But the problem Is: i havent the odroid n2 board.
I have only a Arduino uno.
It a possible another way?

from aacs.

I am afraid that Arduino might not be powerful enough - the communication is based on H264 format so the board need to be powerful enough to encode H264 video signal at headunit's resolution (here it is 800x480) and crypt/decrypt at the same time (SSL).

from aacs.

I think Arduino Is not good for this.
I dont want spend Money to buy a board only for a test.
A Raspberry Pi 3,4 is ok for this?
Your code Is good for a Raspberry?

from aacs.

RPi should be powerful enough, but AFAIK it cannot be connected in USB gadget mode.

from aacs.

I think that the raspberry pi 4 support usb gadget (dwc2)

from aacs.

The code on your repo and your istruction are able with Raspberry 4? So if i found a board by friends, i can try to use it, and then we can try to write istruction and test result for this device and my car

from aacs.

If so, then you can give it a try. Code should theoretically work with any board that has gadget mode enabled in kernel (5.4+ requited). Might be some scripts will require fine tuning.

from aacs.

it is good Raspberry Pi 0?

from aacs.

In theory yes. But i think that the raspberry pi zero has not enough power for that.

from aacs.

my friend has a Raspberry pi 3 not 4 so i haven't device to test it and i can't buy a board only for a test.

But Your project is more interesting!

from aacs.