Second compass ring about compass-card HOT 5 OPEN

Good idea, however I´d need to find a way to make it work space wise.
As the card is not that configurable in sizing of characters clipping or wrapping might occur pretty quickly with another ring inside the first one.

from compass-card.

Maybe program in some limitation if its possible, so when inner ring is used the card can only be sized down to a lower limit ex. 30%(?). To avoid wrapping go automatically down in font size. - If its possible to detect downsizing from the code.
The picture above is from a horizontal stack, with two compass cards, which making this a 1/4 of full size(?)

from compass-card.

I'm not sure if I can detect the sizing, and for now the circle is fixes size. Maybe if I make it relative that would work.

from compass-card.

The card does not have to be (become) smaller than 1/2 of a card row, and then maybe keep a fixe size depending if you use on or two circles. The information for the two sensors can then be moved to the lower corners if that gives more space for data(?)

from compass-card.

Good idea, however I´d need to find a way to make it work space wise. As the card is not that configurable in sizing of characters clipping or wrapping might occur pretty quickly with another ring inside the first one.

Hi, would it be possible to get a second entity : its useful for boat: True Wind Speed and True WInd Angle (TWS TWA) and Apparent Wind Speed and Apparent wind Angle (AWS AWA)

Below a GArmin solution, but would ne enough as start just to have second entity

from compass-card.