tostmann Goto Github PK

a-culfw

Alternative culfw

alex_reinerts_pcb

Some of my PCBs

asksinpp

autoconf

Tasmota autoconf device configurations storage

busware-esp32

culfw

Firmware development for busware.de radio devices

debmatic

debmatic is a project to install the Homematic OCCU on Debian based systems (Debian, Ubuntu, Raspbian, Armbian)

esp_avrisp

An avr programmer for ESP32

ha-addon-raspmatic

TEST

ha_enoceanmqtt

Home Assistant wrapper for enocean-mqtt (https://github.com/embyt/enocean-mqtt)

ha_enoceanmqtt-addon

Home Assistant addon for HA_enoceanmqtt (https://github.com/mak-gitdev/HA_enoceanmqtt)

improv-wifi-library

Improv WiFi library

install

Tasmota Web Installer and firmware repository

iolibrary_driver

Create a repository of WIZnet ioLibrary.

jp-hb-devices-addon

knxd

knxtpuart

This is a fork of the KnxTpUart Library by Thorsten Gehrig.

linux-sunxi

Linux source for Allwinner/Boxchip F20 (sun3i), A10 (sun4i), A12/A13/A10S (sun5i) and A20 (sun7i) SoCs

mhi-ac-ctrl

Reads and writes data (e.g. power, mode, fan status etc.) from/to a Mitsubishi Heavy Industries (MHI) air conditioner (AC) via SPI controlled by MQTT

occu

packet_forwarder

A LoRa packet forwarder is a program running on the host of a LoRa gateway that forwards RF packets receive by the concentrator to a server through a IP/UDP link, and emits RF packets that are sent by the server.

panstamp

panStamp wireless ecosystem - Project files

pivccu

piVCCU is a project to install the original Homematic CCU2 firmware inside a virtualized container (lxc) on ARM based single board computers.

raspberrymatic

:house: A lightweight, buildroot-based Linux operating system alternative for your CCU3, ELV-Charly or for running your IoT "HomeMatic CCU" as a virtual appliance (using ESXi, Proxmox, VirtualBox, Docker/OCI, Kubernetes/K8s, Home Assistant, etc.) or on your own RaspberryPi, Tinkerboard, ODROID, etc. SBC devices...

rpi-busware

rpi-linux

additional supporting patches

rpi-rgb-led-matrix

Controlling up to three chains of 32x32 or 16x32 RGB LED displays using Raspberry Pi GPIO

tasmota

Alternative firmware for ESP8266 and ESP32 based devices with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

w5x00

Linux Kernel driver for WIZnet W5200 and W5500

xboot

XBoot Extensible Bootloader